Full Product Manual

Taylor 30” Bathroom Vanity
Page 3 of 4
STEP 1:
• Place the vanity face down on a
soft surface to begin assembly.
• To attach the four vanity legs
including part A and B, ensure to
place part ‘A’ legs in the location
marked for part ‘A’ and part ‘B’
legs in the location marked for
part ‘B’.
• Using the larger hardware (5/16
size) enclosed in the hardware
pack, including the 4 bolts (H1),
4 lock washers (H2) and 4 flat
washers (H3) secure the legs to
the vanity using the Allen
wrench (H7) as pictured on the
right.
STEP 2:
• To attach the shelf (D) to the
vanity with the assembled legs,
align the L-bracket already
attached on to the shelf with the
existing holes in the installed
legs.
• Using the smaller hardware (1/4)
enclosed in the hardware pack,
including the 4 bolts (H4), 4 lock
washers (H5) and 4 flat washers
(H6), secure the shelf to the
installed legs on the vanity using
the Allen wrench (H7) as
pictured on the right.
STEP 3
• Place the vanity in the desired location and ensure the vanity is level using the adjustable
levelers.
• Install the faucet and all plumbing.
• Ensure there are no water leaks.