Full Product Manual

Monroe 24” Bathroom Vanity
Page 2 of 4
NOTES AND INSTALLATION
● Faucet, drain, silicone and all other plumbing components, tools & hardware are not included.
● Handling will require two people.
● Ensure the vanity is installed on a level floor. Unevenness can cause the vanity to become
misaligned, resulting in twisting of the cabinet. Balance any uneven areas by using the adjustable
levelers.
● Ensure all building & plumbing codes are respected. Professional installation recommended.
STEP 1
• Place the vanity in the desire location.
• Ensure the vanity is level by using the adjustable levelers.
• The drawers need to be removed for plumbing installation. Locate the clips on both sides of the bottom of
the drawer, press the clips and pull the drawer out.
• Install the faucet and all plumbing.
• Reinsert the drawers by aligning the two sides of the drawer glides and slide it until fully inserted.
• Ensure there are no water leaks.
Part A - Vanity w/top 1 PC
Part B - Backsplash 1PC
Before installation, please check and ensure you received the items in the below “Part List”. Please report
any missing items to your retailer immediately.
Part List