Full Product Manual

Jasper 72” Bathroom Vanity
Page 2 of 5
Before installation, please check and ensure you received the items in the below “Part List”. Please report any
missing items to your retailer immediately.
Part List
NOTES, ASSEMBLY AND INSTALLATION
● Faucet, Drain, Silicone and all other plumbing components, tools & hardware are not included.
● Handling will require two people.
● Ensure the vanity is installed on a level floor. Unevenness can cause the vanity to become
misaligned, resulting in twisting of the cabinet. Repair any uneven areas with shims.
● Adjust shelves as needed to accommodate plumbing.
● Ensure all building & plumbing codes are respected. Professional installation recommended.
STEP 1
• Place the vanity in the desired location.
• Ensure the vanity is level by using the adjustable foot
levelers.
• Install the faucet and all plumbing.
• Ensure there are no water leaks.
STEP 2
• With the vanity in its location and all plumbing in place, apply a bead of silicone to the unpolished back side
and bottom edge of the backsplash and secure it to the vanity and wall.
• Wipe away any excess silicone immediately. Allow 24 hours to dry.
Part A - Vanity w/top 1 PC
Part B - Backsplash 1PC