Full Product Manual

Jasper 42” Bathroom Vanity
Page 2 of 4
STEP 1
• Place the vanity in the desired location.
• Ensure the vanity is level by using the adjustable levelers.
• Install the faucet and all plumbing.
• Ensure there are no water leaks.
STEP 2
• With the vanity in its location and all plumbing in place, apply a bead of silicone to the unpolished back side and
bottom edge of the backsplash and secure it to the vanity.
• Wipe away any excess silicone immediately. Allow 24 hours to dry.
Before installation, please check and ensure you received the items in the below “Part List”. Please report any
missing items to your retailer immediately.
Part List
Part A - Vanity w/top 1 PC
Part B - Backsplash 1PC
NOTES, ASSEMBLY AND INSTALLATION
● Faucet, drain, silicone and all other plumbing components, tools & hardware are not included.
● Handling will require two people.
● Ensure the vanity is installed on a level floor. Unevenness can cause the vanity to become misaligned,
resulting in twisting of the cabinet. Repair any uneven areas with shims.
● Adjust shelves as needed to accommodate plumbing.
● Ensure all building & plumbing codes are respected. Professional installation recommended.