Datasheet

www.suco.de
22
0168
Diaphragm pressure switches 42 V
Zinc-plated steel body (CrVI-free)
With M3 screw terminals or spade terminals
Overpressure safe up to 300 bar
1)
With female thread for compression fittings acc. to DIN 2353
Our pressure switches are
also available with factory
pre-set switching points.
Ready-wired versions can be
found starting on page 38
following.
We offer other body
materials and connecting
threads upon request.
Other diaphragm materials
are available on request,
e.g. HNBR or silicone.
AMP 6.3 x 0.8
tin-plated
56
hex 24
M 12 x 1.5
46
hex 24
M 12 x 1.5
Accessories see page 17
With female thread
Adjustment range
in bar (tolerance at
room temperature)
Thread Normally open (no) –› |: Normally closed (nc) –› :|
0168 Diaphragm pressure switches with M3 screw terminals
0.1 – 1 (± 0.2)
M 12x1.5
female
0168 401 16 X 001 0168 402 16 X 002
1 – 10 (± 0.5) 0168 405 16 X 005 0168 406 16 X 006
10 – 20 (± 1.0) 0168 409 16 X 009 0168 410 16 X 010
20 – 50 (± 2.0) 0168 413 16 X 013 0168 414 16 X 014
0168 Diaphragm pressure switches with spade terminals
0.1 – 1 (± 0.2)
M 12x1.5
female
0168 403 16 X 003 0168 404 16 X 004
1 – 10 (± 0.5) 0168 407 16 X 007 0168 408 16 X 008
10 – 20 (± 1.0) 0168 411 16 X 011 0168 412 16 X 012
20 – 50 (± 2.0) 0168 415 16 X 015 0168 416 16 X 016
Diaphragm material
– areas of application
NBR
Hydraulic / machine oil, heating oil, air, nitrogen etc.
1
EPDM
Water, brake uid, ozone, acetylene, hydrogen etc.
2
FKM
Hydraulic uids (HFA, HFB, HFD), petrol/gasoline etc.
3
See page 16 for temperature ranges of diaphragm / seal materials
Order number:
0168 XXX 16 X XXX
R o H S
compliant
1)
Static value. Dynamic value is 30-50% lower. The values refer to the hydraulic or pneumatic part of the
pressure switch.
Insert part for
threaded connection
according to
DIN 2353
Counterpart
(Not included)
Pressure switch
body
Sealing gasket type 0168
Body insertion with counterpart fitting