Datasheet

www.suco.de
25
0167
Diaphragm pressure switches 42 V with brass body
Brass body
With M3 screw terminals or spade terminals
Overpressure safe up to 35 bar
1)
AMP 6.3 x 0.8
tin-plated
46
only R 1/2
hex 24
9 14
36
only R 1/2
hex 24
9 14
R o H S
compliant
With male thread
Accessories see page 17
Our pressure switches are
also available with factory
pre-set switching points.
Ready-wired versions can be
found starting on page 38
following.
We offer other body
materials and connecting
threads upon request.
Other diaphragm materials
are available on request,
e.g. HNBR or silicone.
Adjustment range
in bar (tolerance at
room temperature)
Thread Normally open (no) –› |: Normally closed (nc) –› :|
0167 Diaphragm pressure switches with M3 screw terminals
0.1 – 1 (± 0.2)
M 10x1 con. 0167 401 01 X 001 0167 402 01 X 0 0 4
R 1/8 0167 401 12 X 002 0167 402 12 X 005
R 1/2 0167 401 07 X 003 0167 402 07 X 006
G 1/4 0167 401 03 X 037 0167 402 03 X 038
G 1/8 0167 401 28 X 001 0167 402 28 X 002
1 – 10 (± 0.5)
M 10x1 con. 0167 405 01 X 013 0167 406 01 X 016
R 1/8 0167 405 12 X 014 0167 406 12 X 017
R 1/2 0167 405 07 X 015 0167 406 07 X 018
G 1/4 0167 405 03 X 041 0167 406 03 X 042
G 1/8 0167 405 28 X 005 0167 406 28 X 006
10 – 20 (± 1.0)
M 10x1 con. 0167 409 01 X 025 0167 410 01 X 028
R 1/8 0167 409 12 X 026 0167 410 12 X 029
R 1/2 0167 409 07 X 027 0167 410 07 X 030
G 1/4 0167 409 03 X 045 0167 410 03 X 046
G 1/8 0167 409 28 X 009 0167 410 28 X 010
0167 Diaphragm pressure switches with spade terminals
0.1 – 1 (± 0.2)
M 10x1 con. 0167 403 01 X 007 0167 404 01 X 010
R 1/8 0167 403 12 X 008 0167 404 12 X 011
R 1/2 0167 403 07 X 009 0167 404 07 X 012
G 1/4 0167 403 03 X 039 0167 404 03 X 040
G 1/8 0167 403 28 X 003 0167 404 28 X 004
1 – 10 (± 0.5)
M 10x1 con. 0167 407 01 X 019 0167 408 01 X 022
R 1/8 0167 407 12 X 020 0167 408 12 X 023
R 1/2 0167 407 07 X 021 0167 408 07 X 024
G 1/4 0167 407 03 X 043 0167 408 03 X 044
G 1/8 0167 407 28 X 007 0167 408 28 X 008
10 – 20 (± 1.0)
M 10x1 con. 0167 411 01 X 031 0167 412 01 X 034
R 1/8 0167 411 12 X 032 0167 412 12 X 035
R 1/2 0167 411 07 X 033 0167 412 07 X 036
G 1/4 0167 411 03 X 047 0167 412 03 X 048
G 1/8 0167 411 28 X 011 0167 412 28 X 012
Diaphragm material
– areas of application
NBR
Hydraulic / machine oil, heating oil, air, nitrogen etc.
1
EPDM
Water, brake uid, ozone, acetylene, hydrogen etc.
2
FKM
Hydraulic uids (HFA, HFB, HFD), petrol/gasoline etc.
3
See page 16 for temperature ranges of diaphragm / seal materials
Order number:
0167 XXX XX X XXX
1)
Static pressure, dynamic pressures should be 30 to 50% lower. These values refer to the hydraulic or pneu-
matic part of the pressure switch.