Datasheet

www.suco.de
23
Our pressure switches are
also available with factory
pre-set switching points.
Ready-wired versions can be
found starting on page 38
following.
We offer other body
materials and connecting
threads upon request.
Other diaphragm materials
are available on request,
e.g. HNBR or silicone.
Adjustment range
in bar (tolerance at
room temperature)
Thread Normally open (no) –› |: Normally closed (nc) –› :|
0169 Piston pressure switches with M3 screw terminals
50 – 150 (± 5.0)
M 10x1 con. 0169 417 01 X 001 0169 418 01 X 005
M 12x1.5 0169 417 02 X 002 0169 418 02 X 006
G 1/4 0169 417 03 X 003 0169 418 03 X 007
NPT 1/8 0169 417 04 X 004 0169 418 04 X 008
G 1/8 0169 417 28 X 601 0169 418 28 X 602
M 10x1 cyl. 0169 417 13 X 001 0169 418 13 X 002
0169 Piston pressure switches with spade terminals
50 – 150 (± 5.0)
M 10x1 con. 0169 419 01 X 009 0169 420 01 X 013
M 12x1.5 0169 419 02 X 010 0169 420 02 X 014
G 1/4 0169 419 03 X 011 0169 420 03 X 015
NPT 1/8 0169 419 04 X 012 0169 420 04 X 016
G 1/8 0169 419 28 X 603 0169 420 28 X 604
M 10x1 cyl. 0169 419 13 X 003 0169 420 13 X 004
Seal material
– areas of application
NBR
Hydraulic / machine oil, heating oil, air, nitrogen etc.
1
EPDM
Brake uid, ozone, acetylene etc.
2
FKM
Hydraulic uids (HFA, HFB, HFD), petrol/gasoline etc.
3
See page 16 for temperature ranges of diaphragm / seal materials
Order number:
0169 XXX XX X XXX
Piston pressure switches are only to a limited extent suitable for use with gases.
See explanation on page 9.
0169
Piston pressure switches 42 V
Zinc-plated steel body (CrVI-free)
With M3 screw terminals or spade terminals
Overpressure safe up to 600 bar
1)
R o H S
compliant
36
hex 24
9
AMP 6.3 x 0.8
tin-plated
46
hex 24
9
Accessories see page 17
With male thread
1)
Static pressure, dynamic pressures should be 30 to 50% lower. These values refer to the hydraulic or pneu-
matic part of the pressure switch.