Installation Instructions

Integrated Stainless Steel Panel Installation
subzero.com 800.222.7820
page 2 of 2
KICKPLATE INSTALLATION
Stainless steel or decorative kickplate installation:
1 Remove the paper backing from the magnets on the
factory kickplate. Refer to the illustration below.
2 Attach the kickplate to the magnets.
TRIM INSTALLATION
After panels have been adjusted, install the side trim to the
door/drawers.
Install side trim:
1 Start at the top and align the trim with the front and rear
anges on the bracket, then snap into place by pushing
the trim toward the back of the panel. Refer to the illus-
trations below.
2 Once the top is secure, continue the installation down-
ward until the remaining trim is completely secure.
SCREWMAGNET
Kickplate installation.
SIDE TRIM
FRONT
FLANGE
REAR
FLANGE
Side trim. Bracket anges.