Product Manual

www.ssilocators.com
0 6
SERIES
To select the desired frequency set for software versIons 3.43 and Greater:
• Press and hold depressed the
Power on Button.
• Pressing the
frequency Button will toggle through available configurations. Repeat pressing until 'U5' is displayed in
the Frequency Indicator section of the LCD.
• Release the
Power on Button. 'PRO' will be displayed on the LCD.
• Press the
frequency Button to toggle through the available frequencies.
• To select and store the desired frequency press and hold the
frequency Button for 2 seconds. The count of the
selected frequency will be displayed on the LCD.
• Continue to toggle through and select the desired frequencies,
• Press the
Power on Button to shut the unit off. This will save the selected frequencies for availability during normal
operation.
Note: This setup procedure is not required unless the user desires to change factory settings.
The PL-TT operating programs and frequency sets are user programmable and can be changed at anytime through a quick
selection process.
To select the programming options for the
receIver:
• Press and hold depressed the Power On Button.
• Pressing the FREQUENCY Button will toggle through available frequencies. Passive 512Hz, 8kHz, 33kHz, 82kHz.
• To select a frequency, press the MODE Button toggle. At the top of the LCD the count of frequencies selected will tally
up one each time a frequency is selected.
• Pressing the GAIN UP Button will change the depth reading from inches/feet to centimeter.
• A long press of the Mode Button will toggle on and off the optional ferrous locating feature (Fe).
• Releasing the Power On Butt on will exit the setup menu and save the selected frequencies for availability during normal
operation.
Changing preset funCtions, modes & freQuenCies
reCeiver
transmitter