Product Manual

www.ssilocators.com
11
SERIES
absolute signal strength
gain Change indiCator
loW battery
The PL-TT Locator receIver provides the operator with a direct measurement
of the
receIver's signal strength. The measurement is displayed with two
numerical digits located at the top of the LCD display. The measurement
ranges from 0 (weak) to 99 (strong) signal strength. Absolute Signal
Strength is independent of the GAIN setting or meter reading. It gives the
operator information about the actual amount of signal being radiated
from the conductor and received by the
receIver.
The Absolute Signal Strength will not be displayed if the gain is too high
or too low. Adjust the GAIN to move the meter reading to mid-scale. The
numerical display will change from ‘--’ to a valid measurement.
The GAIN up and down buttons are used to increase and decrease the
gain in small amounts.
The Gain is represented by a
solid line on the top of the bar graph
when the unit is in Direct Mode, Inductive Mode or transmItter Induction
Mode.
The Gain is represented by a
missing line on the bottom of the bar
graph
when the unit is in Ferrous Metal Detection Mode.
The PL-TT Locator will indicate low battery condition by displaying the low
battery icon on the LCD screen.
Gain Indicator
Side View
Overhead
View
Overhead
View