Product Manual

www.ssilocators.com

SERIES

If you rotate the receiver while over the cable, a sharp NULL will identify the cable’s direction. It is

aligned with the flat side of the receiver.

CABLE

PATH

MAXIMUM

RECEIVER

SIGNAL DIRECTION

CABLE

NULL SHOWS

PATH

CABLE

Peak and Pin Point Peak modes have less error rates than the null locating mode in most circumstances.

The peak mode location indication should be verified by the null to ensure locating accuracy.

With the

receiver in a vertical position. Move the receiver left to right across the path. When the

receiver is directly above the cable or pipe, rotate the receiver for a maximum signal. As you move the

receiver away from the cable path, the meter reading (and audio frequency response) will drop off.

The Left/Right arrows operate off of the Null reading. By utilizing the Left/Right arrows while in Peak

mode the user can simultaneously locate in both modes thus quickly identifying the match or discrep-

ancy between the Peak and the Null reading.

There is a variety of locating modes available in the PL-VF unit. PEAK, PINPOINT PEAK, NULL LEFT/

RIGHT GUIDANCE, SONDE, DFF & ACC. To toggle through PEAK, PINPOINT PEAK & NULL simple

press the mode button. To toggle to SONDE mode hold the MODE button for 5 seconds and release.

DFF and ACC modes are only selectable when an appropriate accessory is plugged into the accessory

port in the handle of the receiver.

loCating modes

peak mode loCating