Product Manual

www.ssilocators.com
13
SERIES
ON/OFF Button
This is a multi-use button that controls power on/off and enters the programming mode
allowing the user to customize the operations of the system.
UNIT ON/OFF - When off press once to turn the unit on. The unit will load settings from previous usage.
The automatic shut off will turn the unit OFF after 10 minutes of inactivity.
PROGRAMMING MODE - A long press of 3 seconds will enter the programming menu. A short press will
exit the programming mode from the main menu.
FREQUENCY - A short press of the Frequency button toggles through available selected active and passive
frequencies.
Note: Some frequencies are only available in certain modes and some modes will only be
available with certain frequencies. The available selectable frequencies can be edited within
the programing menu.
MODE SELECT - A short press of the Mode button will toggle through available modes. Peak, Pinpoint
Peak, Null, Left/Right, and Sonde locating modes.
Note: The available selectable modes can be edited within the programing menu.
GAIN BUTTONS (UP OR DOWN)
Adjusts the gain up or down. If the graph shows signal strength off scale, pressing the gain will automatically
adjust to 50% on the scale display.
ABSOLUTE SIGNAL STRENGTH
DEPTH
RELATIVE SIGNAL STRENGTH
BAR GRAPH
GAIN LEVEL INDICATOR
LEFT RIGHT GUIDANCE
Displays direction to
null point of e.m. field.
ANTENNA LOCATE MODE
Displays selected
antenna mode.
Displays Selected Frequency
BATTERY LIFE
Displays receiver's
battery life.
OPERATION MODE
Displays selected operation
mode
"Special Included Feature"
REMOTE CONTROL
Displays remote connection
to transmitter & transmitter
output power.
pl-vf reCeiver Control & indiCators