Product Manual

www.ssilocators.com
14
SERIES
Changing the transmitted frequency with the Remote Control
Select the desired active frequency by pressing the Frequency key. Once the desired
frequency is selected, the icon of the transmitter will flash momentarily then it
becomes solid confirming the selected frequency has been set at the transmitter. If
the transmission is incomplete or if the frequency requested is not available, then
the symbol will continue to flash and 'err' will display momentarily on the receiver's
screen.
Note: In P-Link mode the manual digital depth engaged by the shifT/loG/depTh key is disabled and
the automatic depth function is enabled.
Turning On and Off Remote Control
To turn ON the remote control feature, start by turning the unit ON.
Press and hold depressed the
power on/off for 4 seconds.
"PRO"' will display at the top of the LCD.
Using the
frequenCy key scroll through the primary menu to "P-Link".
Use the
GaIn up key to select the P-Link Menu.
Use the
frequenCy key to select the to select P-Link "on" or "off".
Exit the P-Link Menu submenu by pressing the
GaIn down.
To exit the Programming menu and return to locating, short press the
on/off Key.
In a moment the
remote Control Indicator will be displayed on the receiver LCD indicating the unit
has linked with the transmitter.
The Remote control feature enables the user to remotely control the transmitter with the receiver. The
frequency and power output of the transmitted signal can be controlled up to 800 meters (874 yards).
The PL-VF comes with the remote control feature active on the menu options. If your unit does not have
the Remote Control module, the program will not allow the menu to select the option.
remote Control feature