Product Manual

Connections

The headphone jack has a water resistant cover. Lift open to plug

in a stereo phone plug to listen with a headset in noisy environ-

ments.

Replace a blown fuse with a

1/4 amp fast blow.

Use the included RS-232

cable to connect the MUL

to a computer.

To run on external power or

to charge the battery in the

field, connect the external

DC power cable to the

POWER connector. Con-

nect the other end clips to a

12 to 15 Volt DC power

source. Red to positive and

Black to negative.

The sensor cable is con-

nected to the SENSOR con-

nector. A cable-end mating

connector is supplied on

units purchased without a

cable.