Product Manual

How the AML+ Works
The unit contains an internal control
circuit board, and an antenna board
that controls the center transmitter
and independent left and right signal
receivers.
A powerful 2.45 GHz ground-
penetrating, ultra-high frequency radio
signal locates density differences by
transmitting inverted conical shaped
UHF signals into the ground.
The unit locates objects by analyzing
differences in subsurface material
densities. Man-made objects or
geometries with a straight edge create
a change in conductivity, density and/
or permeability from surrounding
materials. This causes a distortion in
the return signal detected by the UHF
receivers on the sides of the AML+,
and is interpreted by the advanced
microprocessor circuit board
technology.
OPERATING INSTRUCTIONS
User Reference - Scanning QR Codes
AML+ reference videos and instructions can be accessed from
your smart phone using a standard QR code app. QR codes can
be found and scanned from the blade side (or backside) of your
AML+ unit. For more information on how to download and/or use a
QR code app, visit the app store on your smart phone. Reference
materials can also be accessed by visiting the SSI website at
ssilocators.com.
4