Product Manual

Marking the Exact Location of an
Object with the AML+
Remember that the 10º forward
projection of the blade will make the
object appear closer than it actually is
(see gure 11-1). Once the object is
found, pivot the handle of the AML+
upward until the blade (or bottom of
the AML+) is perpendicular to the
ground and directly above the area of
the signal (see gure 11-2). You can
now scan the ground in parallel for the
entire length of the object, identifying
its diameter or width, location and run
direction as you track the object.
Note: Read the Safety Notes section
(pages 3-4) before operating your
AML+.
11
10°
Figure 11-2
Locating Position:
Tilt the handle forward 10º when
locating the exact edge of an object.
10°
Figure 11-1
Searching Position:
Objects are further than they appear
when in the searching position.