Spec Sheet

Semi-Trash > Print chart

Pump Overview:

PKX320ST

Pump Family Overview:

For demanding water removal applications where small abrasive material may cause premature wear on

centrifugal pumps, Subaru offers a complete line of semi-trash units. Deeper impeller vanes coupled with a

large volute discharge opening allow Subaru’s semi-trash pumps to pass water containing particulate matter

and small solid objects without clogging the passage. These self-priming construction pumps feature a tough

silicone-carbide mechanical seal and a quick clean-out port for easy maintenance and long service life.

Specifications:

Type Self Priming

Suction/Discharge Size 3 inches

Maximum Capacity 246 gallons per minute

Maximum Lift Head 92 feet

Maximum Suction Lift 26 feet

Maximum PSI (max. head/2.31) 40

Mechanical Seal Material Silicon Carbide

Engine Model EX17

Engine Type Subaru air-cooled, 4 cycle, OHC

Fuel Gasoline

Horsepower 5.7 HP

Low Oil System Shutdown

Spark Arrestor Standard

Run Time (per tank, full load) 1.8 hours

Fuel Tank Capacity .85 gallons

Starting System Recoil

Dimensions (LxWxH) 19.9" x 15.2" x 18.4"

Net Weight 69 lbs.

Tool Kit Standard

Vibration Isolators (loose) Standard

Hose Coupling Standard

Hose Band Standard

Strainer Standard

Key Features & Benefits:

Subaru Robin http://robinamerica.com/pspecsheet.aspx?pid=258

1 of 2 4/26/2013 3:03 PM

PAGE 1
Subaru Robin 1 of 2 http://robinamerica.com/pspecsheet.aspx?pid=258 Semi-Trash > Print chart Pump Overview: PKX320ST Pump Family Overview: For demanding water removal applications where small abrasive material may cause premature wear on centrifugal pumps, Subaru offers a complete line of semi-trash units. Deeper impeller vanes coupled with a large volute discharge opening allow Subaru’s semi-trash pumps to pass water containing particulate matter and small solid objects without clogging the passage.
PAGE 2
Subaru Robin 2 of 2 http://robinamerica.com/pspecsheet.aspx?pid=258 Self Priming Self priming pumps require initial priming to operate. Silicon Carbide Mechanical Seal Heavy-duty, self-lubricating silicon carbide mechanical seal resists wear from abrasive debris, while easily replaceable shims maximize performance over the pump's life. Cast-Iron Impeller and Volute Abrasion-resistant, hardened cast-iron impeller and volute effectively withstands suspended debris sucked through the strainer.