B U I LT - I N O V E N S I NSTALLATION I NSTRUCTIONS
As you follow these instructions, you will notice WARNING and CAUTION symbols. This blocked information is important for the safe and efficient installation of Wolf equipment. There are two types of potential hazards that may occur during installation. signals a situation where minor injury or product damage may occur if you do not follow instructions. states a hazard that may cause serious injury or death if precautions are not followed.
W O L F B U I LT- I N OV E N S I N S TA L L AT I O N R E Q U I R E M E N T S S I T E P R E PA R AT I O N IMPORTANT NOTE: This installation must be completed by a qualified technician. IMPORTANT NOTE: A minimum 24" (610) of usable cabinet depth is required, or the back panel of the cabinet may need to be removed for proper installation. The electrical box must be flush with the back panel of the cabinet. IMPORTANT NOTE: Save these Installation Instructions for the local inspector’s use.
W O L F B U I LT- I N OV E N S 30" (762) SINGLE OV E N MODELS SO30F AND SO30U I N S TA L L AT I O N O P T I O N S IMPORTANT NOTE: A minimum 24" (610) of usable cabinet depth is required, or the back panel of the cabinet may need to be removed for proper installation. The electrical box must be flush with the back panel of the cabinet. The Wolf 30" (762) single oven may be installed below a Wolf 30" (762) electric or gas cooktop.
I N S TA L L AT I O N I N S T R U C T I O N S I N S TA L L AT I O N S P E C I F I C A T I O N S MODELS SO30F AND SO30U Overall Width 29 7/8" (759) Minimum Cabinet Width 30" (762) Overall Height 27 1/2" (699) Minimum Cabinet Depth 24" (610) Overall Depth 24" (610) Opening Width 28 1/2" (724) 20 3/4" (527) Opening Height 27 3/16" (691) Door Clearance Recommended Cabinet Width 33" (838) Minimum Base Support 250 lbs (113 kg) 33" (838) RECOMMENDED CABINET WIDTH 30" min (762) E 24" min (610)
W O L F B U I LT- I N OV E N S 36" (914) SINGLE OV E N MODEL SO36U I N S TA L L AT I O N O P T I O N S IMPORTANT NOTE: A minimum 24" (610) of usable cabinet depth is required, or the back panel of the cabinet may need to be removed for proper installation. The electrical box must be flush with the back panel of the cabinet. The 36" (914) single oven may be installed below a Wolf 36" (914) electric or gas cooktop.
I N S TA L L AT I O N I N S T R U C T I O N S I N S TA L L AT I O N S P E C I F I C A T I O N S MODEL SO36U Overall Width 35 5/8" (905) Minimum Cabinet Width 36" (914) Overall Height 24 3/8" (619) Minimum Cabinet Depth 24" (610) Overall Depth 24" (610) Opening Width 34 1/2" (876) 17 3/4" (451) Opening Height 24 1/16" (611) Door Clearance Recommended Cabinet Width 39" (991) Minimum Base Support 250 lbs (113 kg) 39" (991) RECOMMENDED CABINET WIDTH 36" min (914) E 24" min (610) 24 1/16"
W O L F B U I LT- I N OV E N S 30" (762) DOUBLE OV E N MODELS DO30F AND DO30U IMPORTANT NOTE: A minimum 24" (610) of usable cabinet depth is required, or the back panel of the cabinet may need to be removed for proper installation. The electrical box must be flush with the back panel of the cabinet. IMPORTANT NOTE: Unless you are using cabinets deeper than 24" (610), it is recommended that the electrical supply be placed in an adjacent cabinet within reach of the conduit.
I N S TA L L AT I O N I N S T R U C T I O N S I N S TA L L AT I O N S P E C I F I C A T I O N S MODELS DO30F AND DO30U Overall Width 29 7/8" (759) Minimum Cabinet Width 30" (762) Overall Height 50" (1270) Minimum Cabinet Depth 24" (610) Overall Depth 24" (610) Opening Width 28 1/2" (724) 20 3/4" (527) Opening Height 49 5/8" (1260) Door Clearance Recommended Cabinet Width 33" (838) Minimum Base Support 400 lbs (181 kg) 33" (838) RECOMMENDED CABINET WIDTH 30" min (762) E 24" min (610) OP
W O L F B U I LT- I N OV E N S I N S TA L L AT I O N S P E C I F I C A T I O N S I N S TA L L A T I O N O P T I O N S The Wolf 30" (762) single oven may be installed in combination with a Wolf nonconvection or convection microwave oven with 30" (762) trim kit and a 30" (762) warming drawer with stainless steel or integrated drawer front. Refer to the illustration below, and pages 4–5 for installation specifications for the 30" (762) single oven.
I N S TA L L AT I O N I N S T R U C T I O N S I N S TA L L I N G T H E O V E N U N PA C K T H E O V E N Cut the wire bands at the top and bottom of the shipping carton. Remove the carton top cover, front support and four corner posts. Remove the carton sleeve by lifting the sleeve up and over the appliance. Remove the plastic bag. With the oven still on the shipping base, carefully move it close to the installation opening.
W O L F B U I LT- I N OV E N S ELECTRICAL R E Q U I R E M E N T S Verify that power is disconnected from electrical box before proceeding. I M P O R TA N T N OT E You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service. Maximum connected load: 5.1 kW for 30" (762) and 36" (914) single ovens; 8.9 kW for the double oven.
I N S TA L L AT I O N I N S T R U C T I O N S I N S TA L L I N G T H E O V E N FOUR-WIRE ELECTRICAL SYSTEM To connect to a four-wire electrical system, follow these steps: Separate the ground and white appliance wires. Connect the white appliance wire to the neutral (white) supply wire in the electrical box. POSITION THE OVEN The oven is very heavy—use caution when lifting. It is recommended that two people lift and position the oven into the opening. Wear gloves to protect hands from any sharp edges.
W O L F B U I LT- I N OV E N S I N S TA L L I N G T H E O V E N M O U N T OV E N TO C A B I N E T Once the oven is fully inserted into the cabinet opening, locate the mounting holes on the oven side trim. There will be four for a single oven and six for a double oven. Refer to the illustration below. Use a 1/16" drill bit to drill pilot holes into the cabinet. Use the provided wood screws to secure the oven to the cabinet through the oven mounting holes.
I N S TA L L AT I O N I N S T R U C T I O N S TROUBLES H O OT I N G I F Y O U N E E D S E RV I C E IMPORTANT NOTE: If the built-in oven does not operate properly, follow these troubleshooting steps: If service is necessary, maintain the quality built into your built-in oven by calling a Wolf authorized service center. Verify that power is being supplied to the oven. To obtain the name and number of a Wolf authorized service center, check the Locator section of our website, wolfappliance.
W O L F A P P L I A N C E C O M PA N Y, L L C 807558 9 / 2005 P. O. B OX 4 4 8 4 8 MADISON, WI 53744 800-332-9513 W O L FA P P L I A N C E .
