Installation Guide

4 | Sub-Zero Customer Care 800.222.7820
W
OPENING WIDTH
34
1
/
2
"
(876)
OPENING
HEIGHT
TOP VIEW
SIDE
VIEW FRONT VIEW
NOTE:
3
1
/2" (89) finished returns will be visible and should be finished to match cabinetry.
3
/4" (19)
TYPICAL
FRAMED
CABINETRY
W
FILLER
3
1
/2" (89)
FINISHED
RETURN
FRAMELESS
CABINETRY
W
3
/4" (19)
TYPICAL
3
1
/2" (89)
FINISHED
RETURN
24" (610)
OPENING
DEPTH
Opening Dimensions
MODEL UW-24
MODEL UW-24 | UW-24FS SITE PREPARATION
OPENING WIDTH
W
UW-24 24" (610)
DUAL OPENING WIDTH
W
Two 24" (610) Models 48
1
/8" (1222)
Dual installation kit required.
DUAL INSTALLATION
If two units are installed side by side, a dual installation kit
may be required. Installations without a custom ller strip
require a dual installation kit. If a dual installation kit is not
specied, a 2"
(51) ller strip is recommended between the
units. Dual installations without a ller strip can only be
accomplished using two units with opposite hinges. Refer to
the illustrations below.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd
a showroom section of our website, subzero.com. For
questions regarding the installation, call Sub-Zero Customer
Care at 800-222-7820.
WITHOUT FILLER STRIP
FILLER STRIP
Opposite hinges Same side hinges