Design Guide

Dimensions in
parentheses are in
millimeters unless
otherwise specified.
UNDERCOUNTER REFRIGERATION
74
OVERLAY PANEL SPECIFICATIONS
Undercounter Models
Models UC-24R and UC-24C
Door Panel Width 23
3
/4" (603)
Door Panel Height 30
1
/16"(764)
Panel Thickness
5
/8"(16)min
Panel Weight Limit 20 lbs (9 kg) max
Model UC-24B
Door Panel Width 23
3
/4" (603)
Door Panel Height 30
1
/16"(764)
Width of Rails and Stiles 2
1
/4" (57) min
Panel Thickness
5
/8"(16)min
Panel Weight Limit 10 lbs (5 kg) max
Model 315I(P)
Door Panel Width 15" (381)
Door Panel Height 30
3
/8" (772)
Panel Thickness
5
/8"(16)min
Panel Weight Limit 15 lbs (7 kg) max
Rails and stiles must be a minimum of 2
1
/4" (57)
wide. They can be increased in size but should
not exceed cabinet manufacturers standard
width. Rails and stiles cannot exceed the overall
door panel dimensions specified, as they would
interfere with the operation of the door. The
back sides of rails and stiles that will be visible
through the glass door will need to be finished.
Also, the inside edges of the frames must be
finished to match the front surface.
OVERLAY PANEL – MODELS UC-24R
AND UC-24C
The overlay door panel design allows for a
decorative panel to cover the door trim for a
seamless appearance that will compliment
surrounding cabinetry. You may also choose to
match the handle hardware of surrounding
cabinetry.
Refer to the Overlay Panel Specifications below
for the panel dimensions of your specific model.
Outdoor Model UC-24RO is available as a classic
stainless steel model only and comes with door
panel and handle in place.
OVERLAY PANEL – MODEL UC-24B
The overlay door panel applied to the Model
UC-24B will consist of only a frame and will affix
directly to the door with screws through a series
of predrilled holes in the perimeter of the door.
The glass door opening of the Model UC-24B is
designed to be exposed to room air circulation.
Decorative overlays on the glass should be kept
to a minimum. Refer to the Overlay Panel
Specifications below for panel dimensions.
Models UC-24R
and UC-24C
INSTALLATION
To install framed or
overlay panels, see
the detailed proce-
dures outlined in the
Sub-Zero Under-
counter Installation
Instructions.
Refer to the full-
scale illustrations at
the end of this
section for specifics
on door openings
and other specifica-
tions.
W
H
W
H
A solid panel must not be installed on a
glass door unit, as this may cause moisture
to form behind the panel.
Model UC-24B
OVERLAY PANEL – MODEL 315I(P)
It is important to understand the differences in
mounting any wood panel to the Model 315I(P).
Refer to the Overlay Panel Specifications below
for panel dimensions. Also refer to the installa-
tion instructions packaged with the unit to
understand how the panel is installed.
Model 315I(P)
W
H