Design Guide

Dimensions are in
inches with millime-
ters in parentheses
unless otherwise
specified.
INTEGRATED REFRIGERATION
44
PANEL CONSIDERATIONS
The illustrations below provide panel width
dimensions for installation of a single tall unit,
27" (686) and 36" (914) wide models.
Illustrations on the following page provide panel
width dimensions for installing two tall units
side by side, 27" (686) wide models and 36"
(914) wide models.
26
3
4
(679)
3
4
(19)
PANEL
APPLIANCE
DOOR WIDTH
SUB-ZERO
UNIT
TO BACK
OF UNIT
25
7
8
(657)
27
(686)
24
(610)
CABINETRY
OR SIDE
PANEL
25
(635)
CABINETRY
OR SIDE
PANEL
25
(635)
1
8
(3)
REVEAL
min
*
1
8
(3)
REVEAL
min
*
*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL
35
3
4
(908)
3
4
(19)
PANEL
APPLIANCE
DOOR WIDTH
SUB-ZERO
UNIT
TO BACK
OF UNIT
34
7
8
(886)
36
(914)
24
(610)
CABINETRY
OR SIDE
PANEL
25
(635)
CABINETRY
OR SIDE
PANEL
25
(635)
1
8
(3)
REVEAL
min
*
1
8
(3)
REVEAL
min
*
*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL
IMPORTANT NOTE: The depth of each
Integrated model is 24" (610) from the front of
the unit to its back. You must allow for the
thickness of the panel you are applying when
planning for the finished rough opening depth if
you want the front panel to be flush with
surrounding cabinetry. You may have to move
the unit back into drywall or bring the cabinets
forward to achieve a flush fit.
36" (914)
WIDE MODELS
Panel width dimen-
sions for installation
of a 36" (914) wide
tall unit.
Dimensions are based
on a
1
/8"(3) reveal. A
reveal of up to
1
/4"(6)
is possible, but panel
dimensions need to be
adjusted accordingly.
27" (686)
WIDE MODELS
Panel width dimen-
sions for installation
of a 27" (686) wide
tall unit.
Dimensions are based
on a
1
/8"(3) reveal. A
reveal of up to
1
/4" (6)
is possible, but panel
dimensions need to be
adjusted accordingly.
PANEL
REQUIREMENTS
Door and drawer
panels must be a
minimum of
5
/8"(16)
thick.
The door panel
cannot exceed 40 lbs
(18 kg) and each
drawer panel must
not exceed 12 lbs
(5 kg) for 27" (686)
wide units. For 36"
(914) wide units, the
door panel weight
limit is 53 lbs (24 kg)
and 16 lbs (7 kg) for
each drawer panel.