SUB-ZERO DESIGN GUIDE
CONTENTS Built-In Refrigeration 4 Integrated Refrigeration 31 Wine Storage 50 Undercounter Refrigeration 67 Warranty 77 Features and specifications indicated herein and on our website are subject to change at any time without notice. Check our website, subzero.com, for the most up-to-date specifications. SUB-ZERO ® is a registered trademark of Sub-Zero, Inc.
SUB-ZERO DESIGN GUIDE WELCOME TO SUB-ZERO We make the ultimate built-in, integrated and undercounter refrigerators, freezers and wine storage units. We offer more solutions to your daily design problems of trying to work the largest appliance into a home without being obtrusive. Placing refrigeration in the home is no longer a problem, but, rather, an opportunity to exercise your creativity.
B U I LT- I N R E F R I G E R AT I O N B U I LT- I N R E F R I G E R AT I O N Sub-Zero’s Built-In line offers you the most complete set of design options in built-in refrigeration for all of its models, from the classic look of the framed unit to the beauty of the overlay models and the professional treatment of the wrapped stainless steel doors. Aside from the classic stainless steel, Sub-Zero offers platinum and carbon premium stainless steel finishes on its Built-In models and many related accessories.
B U I LT- I N R E F R I G E R AT I O N B U I LT- I N R E F R I G E R AT I O N A L L R E F R I G E R AT O R | A L L F R E E Z E R These illustrations represent the full line of Sub-Zero Built-In models shown in the stainless steel design application with heavy-duty grille. Models 648PRO and 648PROG are available as built-in or free-standing units in classic stainless steel only.
B U I LT- I N R E F R I G E R AT I O N B U I LT- I N F E AT U R E S Framed models—the classic look that made Sub-Zero famous—feature a louvered grille and elegant full-length handle. An optional panel grille is available for framed units, except for Models 601R, 601RG and 601F. Optional panel conversion kits are available for the new ice and water dispensing Models 685 and 695. SUB-ZERO WARRANTY Sub-Zero products are covered by a two, five and twelve year residential warranty (exclusions apply).
B U I LT- I N R E F R I G E R AT I O N MODEL 601R MODEL 601RG MODEL 601F A L L R E F R I G E R AT O R A L L R E F R I G E R AT O R WITH GLASS DOOR ALL FREEZER Energy Star Qualified Energy Star Qualified MODEL OPTIONS MODEL OPTIONS MODEL OPTIONS Framed Design 601R/F Framed Design 601RG/F Framed Design 601F/F Overlay Design 601R/O Overlay Design 601RG/O Overlay Design 601F/O Classic Stainless Steel 601R/S Classic Stainless Steel 601RG/S Classic Stainless Steel 601F/S Platinum Sta
B U I LT- I N R E F R I G E R AT I O N MODEL 611 MODEL 611G OVER-AND-UNDER OVER-AND-UNDER WITH GLASS DOOR Energy Star Qualified Verify availability with your local dealer or distributor. MODEL OPTIONS Framed Design 611/F Framed Design 611G/F *Annual energy costs are based on 9.06 cents per kilowatt hour.
B U I LT- I N R E F R I G E R AT I O N MODEL 650 MODEL 650G OVER-AND-UNDER OVER-AND-UNDER WITH GLASS DOOR Energy Star Qualified MODEL OPTIONS MODEL OPTIONS ACCESSORIES Framed Design 650/F Framed Design 650G/F Overlay Design 650/O Overlay Design 650G/O Classic Stainless Steel 650/S Classic Stainless Steel 650G/S Platinum Stainless Steel 650/P Platinum Stainless Steel 650G/P Carbon Stainless Steel Carbon Stainless Steel 650/B S P E C I F I C AT I O N S 650G/B S P E C I F I C AT I O
B U I LT- I N R E F R I G E R AT I O N MODEL 661 MODEL 642 MODEL 685 S I D E - B Y- S I D E S I D E - B Y- S I D E S I D E - B Y- S I D E I C E | W AT E R D I S P E N S I N G MODEL OPTIONS MODEL OPTIONS MODEL OPTIONS Framed Design 661/F Framed Design 642/F Framed Design 685/F Overlay Design 661/O Overlay Design 642/O Overlay Design 685/O Classic Stainless Steel 661/S Classic Stainless Steel 642/S Classic Stainless Steel 685/S Platinum Stainless Steel 661/P Platinum Stainless Ste
B U I LT- I N R E F R I G E R AT I O N MODEL 632 MODEL 695 S I D E - B Y- S I D E S I D E - B Y- S I D E I C E | W AT E R D I S P E N S I N G MODEL OPTIONS MODEL OPTIONS Framed Design 632/F Framed Design 695/F Overlay Design 632/O Overlay Design 695/O Classic Stainless Steel 632/S Classic Stainless Steel 695/S 632/B S P E C I F I C AT I O N S *Annual energy costs are based on 9.06 cents per kilowatt hour. All models are shown in the stainless steel design application.
B U I LT- I N R E F R I G E R AT I O N MODEL 648PRO MODEL 648PROG S I D E - B Y- S I D E B U I LT- I N O R F R E E - S TA N D I N G S I D E - B Y- S I D E WITH GLASS DOOR B U I LT- I N O R F R E E - S TA N D I N G *Annual energy costs are based on 9.06 cents per kilowatt hour.
B U I LT- I N R E F R I G E R AT I O N PLANNING INFORMATION PLUMBING CONSIDERATIONS Although the Sub-Zero Built-In line offers a wide range of designs and configurations, the basic planning considerations for all models have much in common. As you integrate Built-In models into your overall plan, review installation requirements for your particular model(s). The Installation Specifications illustrations provide planning information for all Built-In models— framed, overlay and stainless steel.
B U I LT- I N R E F R I G E R AT I O N OVERALL DIMENSIONS All Refrigerator | All Freezer Models A L L R E F R I G E R AT O R ALL FREEZER 73" 73" 73" (1854) (1854) (1854) Model 601R All Refrigerator Model 601RG All Refrigerator with Glass Door Model 601F All Freezer 36" 36" 36" 24" (914) (914) (914) (610) Model 601R Model 601RG Model 601F All Refrigerator All Refrigerator with Glass Door All Freezer Width Width Width 36" (914) 36" (914) 36" (914) Height 73" (1854) Height 73" (1
B U I LT- I N R E F R I G E R AT I O N OVERALL DIMENSIONS Over-and-Under Refrigerator / Freezer Models OVER-AND-UNDER 84" 84" 84" 84" (2134) (2134) (2134) (2134) Model 611 Model 611G with Glass Door Model 650 Model 650G with Glass Door 30" 30" 36" 36" 24" (762) (762) (914) (914) (610) Model 611 Model 611G Model 650 Model 650G with Glass Door Width 30" (762) Width 30" (762) with Glass Door Width 36" (914) Width 36" (914) Height 84" (2134) Height 84" (2134) Height 84" (213
B U I LT- I N R E F R I G E R AT I O N OVERALL DIMENSIONS Side-by-Side Refrigerator | Freezer Models 84" (2134) 36" 42" 42" 48" 48" 24" (914) (1067) (1067) (1219) (1219) (610) Model 661 Model 642 Model 685 Model 632 Model 695 Ice | Water Dispensing Width 36" (914) Width 42" (1067) Width 42" (1067) Ice | Water Dispensing Width 48" (1219) Width 48" (1219) Height 84" (2134) Height 84" (2134) Height 84" (2134) Height 84" (2134) Height 84" (2134) Depth Depth Depth Depth D
B U I LT- I N R E F R I G E R AT I O N OVERALL DIMENSIONS PRO 48 Side-by-Side Refrigerator | Freezer Models 84" 23 7/8" (2134) (606) PRO 48 S I D E - B Y- S I D E Model 648PRO Built-In or Free-Standing Model 648PROG with Glass Door Built-In or Free-Standing 48" 48" (1219) (1219) 25 7/8" (657) 30 5/32" (766) Model 648PRO Model 648PROG with Glass Door Width 48" (1219) Height 84" (2134) Depth 23 7/8" (606)* 25 7/8" (657)** Width 48" (1219) Height 84" (2134) Depth 23 7/8" (606)* 25 7/8" (6
B U I LT- I N R E F R I G E R AT I O N ACCESSORIES Optional accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Showroom Locator section of our website, subzero.com. ANTI-TIP BLOCKING KIT FRAMED DOOR PANELS To prevent the unit from tipping forward and to provide a stable installation, the unit must be secured in place with an anti-tip blocking kit.
B U I LT- I N R E F R I G E R AT I O N GLASSWELL PANEL OPTIONS OPTIONAL PANEL GRILLE If you choose not to use custom wood panels above or below the glasswell for Model 685 or 695 framed application, a stainless steel insert panel will be provided with the partial framed accessory kit. This accessory kit (FRAMPAR), includes partial framed molding and classic stainless steel inset handle panel to provide a spill-resistant finish above and below the glasswell on the refrigerator door only.
B U I LT- I N R E F R I G E R AT I O N F R A M E D D O O R PA N E L S P E C I F I C AT I O N S F R A M E D D O O R PA N E L S P E C I F I C AT I O N S All Refrigerator | All Freezer Framed (F) Models Over-and-Under Framed (F) Models Model 601R W H Model 611 W H Refrigerator Framed Panel 34 1/8" (867) 58 15/16" (1497) Refrigerator Framed Panel 28 1/8" (714) 48 1/16" (1221) Freezer Framed Panel 28 1/8" (714) 18 3/8" (467) Raised Panel Handle Recess Location – Refrigerator Panel A) 29 15/3
B U I LT- I N R E F R I G E R AT I O N F R A M E D D O O R PA N E L S P E C I F I C AT I O N S PARTIAL FRAMED DOOR PANEL OPTION Side-by-Side Framed (F) Models Ice | Water Dispensing Framed (F) Models Model 661 W H Model 685 W H Refrigerator Framed Panel 19 1/8" (486) 67 11/16" (1719) Refrigerator Partial Framed Panel 15 5/8" (397) 67 11/16" (1719) Freezer Framed Panel 14 5/8" 67 11/16" Freezer Partial Framed Panel 15 5/8" 67 11/16" (1719) Model 695 W Refrigerator Partial Framed Pane
B U I LT- I N R E F R I G E R AT I O N OVERLAY DOOR PANELS If you and your client have ordered an overlay design model, you will be adding panels to give the unit the custom Sub-Zero look. The overlay panel design option is available on all Built-In units except Models 648PRO and 648PROG. For exact door panel dimensions for Built-In overlay models, refer to the Overlay Panel Specifications on pages 24–25.
B U I LT- I N R E F R I G E R AT I O N OVERLAY DOOR PANELS For glass door Models 601RG, 611G and 650G, the refrigerator door panel must include a cutout to accommodate the window. Refer to the Overlay Panel Specifications for Models 601RG, 611G and 650G on page 24. Illustration 8 shows how you can box out a landing space for the bezel using stiles and rails to create this space. Again, keep in mind, that the total thickness of the panel at this level must not exceed 1 1/8" (29).
B U I LT- I N R E F R I G E R AT I O N O V E R L AY D O O R PA N E L S P E C I F I C AT I O N S O V E R L AY D O O R PA N E L S P E C I F I C AT I O N S All Refrigerator | All Freezer Overlay (O) Models Over-and-Under Overlay (O) Models Model 601R W H Model 611 W H Refrigerator Overlay Panel 34 7/16" (875) 59 1/4" (1505) Refrigerator Overlay Panel 28 7/16" (722) 48 7/8" (1241) 58 5/16" Refrigerator Spacer Panel 27 1/2" (699) 47 7/16" (1205) Refrigerator Backer Panel 28 1/8" (714) 48
B U I LT- I N R E F R I G E R AT I O N O V E R L AY D O O R PA N E L S P E C I F I C AT I O N S OVERLAY GRILLE PANEL Side-by-Side Overlay (O) Models Overlay (O) Models Width Dimensions Model 661 W H Models 611 and 611G Refrigerator Overlay Panel 19 7/16" (494) 68" (1727) Overlay Panel Width 28 7/16" (722) Refrigerator Spacer Panel 18 1/2" (470) 67 1/16" (1703) Spacer Panel Width 27 1/2" (699) Refrigerator Backer Panel 19 1/8" 67 11/16" Backer Panel Width 28 1/8" (714) Freezer Overlay
B U I LT- I N R E F R I G E R AT I O N ACCESSORIES Optional accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Showroom Locator section of our website, subzero.com. HANDLE HARDWARE SIDE PANELS Overlay models come without handle hardware. The beauty of this design is that you can match the surrounding cabinet hardware. You or the cabinet manufacturer must provide handle hardware to match the overall decorating scheme.
B U I LT- I N R E F R I G E R AT I O N PANEL AND HANDLE PROFILE – FRAMED APPLICATION OPTIONAL EXTENDED FULL-LENGTH HANDLE FULL-SCALE T E M P L AT E S 1" 2" 3" (25) (51) (76) 11/4"(32) PANEL STANDARD FULL-LENGTH HANDLE 1"(25) PANEL 3/4"(19) PANEL 1/2"(13) PANEL 1/4"(6) PANEL 1/4"(6) FRAMED PANEL The full-scale illustrations on the following pages enable you to understand some of the unique situations you may face as you plan for the installation of the Built-In models.
B U I LT- I N R E F R I G E R AT I O N PANEL AND HANDLE PROFILE – OVERLAY AND STAINLESS STEEL APPLICATION STANDARD STAINLESS STEEL HANDLE 1" 2" 3" (51) (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL 5/8" (16) PANEL 1/2" (13) PANEL 1/4" (6) PANEL 1/4" (6) APPROXIMATE THICKNESS OF WRAPPED STAINLESS STEEL DOOR DOOR NOTE: FOR OVERLAY APPLICATIONS, OPTIONAL STAINLESS STEEL HANDLE MUST BE MOUNTED ON PANEL MINIMUM 5/8" (16) THICK.
B U I LT- I N R E F R I G E R AT I O N PANEL AND HANDLE PROFILE – 130˚ DOOR OPENING (TOP VIEW) The full-scale illustration shows the panel and handle profile for 130˚ door opening with a 2" (51) filler strip. Interference of door panels with handles at maximum door swing may require the use of an optional 90˚ door stop available through your Sub-Zero dealer.
B U I LT- I N R E F R I G E R AT I O N OVERLAY PANEL APPLICATION – 90˚ DOOR OPENING (TOP VIEW) The full-scale illustration shows what considerations you need to make for overlay panel applications and how they may interact with adjacent cabinets and countertops.
INTEGRATED REFRIGERATION INTEGRATED REFRIGERATION A L L R E F R I G E R AT O R | A L L F R E E Z E R NEW For generations, the Sub-Zero name has been synonymous with built-in refrigeration. With the Integrated line, we have taken the idea a step further—refrigerators and freezers you can hide anywhere in the house, inside the furniture or cabinetry of your choosing.
INTEGRATED REFRIGERATION MODEL 700TR MODEL 736TR A L L R E F R I G E R AT O R A L L R E F R I G E R AT O R MODEL 700TF NEW ALL FREEZER MODEL OPTIONS Automatic Ice Maker S P E C I F I C AT I O N S S P E C I F I C AT I O N S 700TFI S P E C I F I C AT I O N S Overall Width 27" (686) Overall Width 36" (914) Overall Width 27" (686) Overall Height 80" (2032) Overall Height 80" (2032) Overall Height 80" (2032) Overall Depth 24" (610) Overall Depth 24" (610) Overall Depth 24" (610) Re
INTEGRATED REFRIGERATION MODEL 700TC MODEL 736TC OVER-AND-UNDER OVER-AND-UNDER MODEL OPTIONS Automatic Ice Maker MODEL OPTIONS 700TCI S P E C I F I C AT I O N S Automatic Ice Maker 736TCI S P E C I F I C AT I O N S Overall Width 27" (686) Overall Width 36" (914) Overall Height 80" (2032) Overall Height 80" (2032) Overall Depth 24" (610) Overall Depth 24" (610) Refrigerator Capacity 10.2 cu ft (289 L) Refrigerator Capacity 13.3 cu ft (377 L) Freezer Capacity 5.
INTEGRATED REFRIGERATION MODEL 700BR MODEL 700BF MODEL 700BC R E F R I G E R AT O R D R A W E R S FREEZER DRAWERS R E F R I G E R AT O R | F R E E Z E R DRAWERS Energy Star Qualified MODEL OPTIONS Automatic Ice Maker S P E C I F I C AT I O N S MODEL OPTIONS 700BFI S P E C I F I C AT I O N S Automatic Ice Maker 700BCI S P E C I F I C AT I O N S Overall Width 27" (686) Overall Width 27" (686) Overall Width 27" (686) Overall Height 34 1/2" (876) Overall Height 34 1/2" (876) Overall Hei
INTEGRATED REFRIGERATION INTEGRATED FEATURES All Integrated models accept wood or stainless steel panels. The optional stainless steel panels and handles are available in classic, platinum and carbon stainless steel finishes at the 80" (2032) height, and only classic stainless steel at the 84" (2134) height. Stainless steel panels are ordered and shipped as sales accessories. Dairy Shelf. This magnetically sealed compartment is fully adjustable on the tall refrigerator and combination units.
INTEGRATED REFRIGERATION PLANNING INFORMATION Before moving the Integrated unit into place, be sure that the finished opening dimensions, electrical and plumbing locations and minimum door and drawer clearances are accurate. Refer to the Installation Specifications illustration for your model on the following pages. Be sure your installer has this information before finishing work is completed.
INTEGRATED REFRIGERATION OVERALL DIMENSIONS Models 700TR, 700TF(I) and 700TC(I) 27" 24" (686) (UNIT DIMENSION) (610) (UNIT DIMENSION) TOP OF ROUGH OPENING 14"(356) A L L R E F R I G E R AT O R ALL FREEZER 13/16" (21) 24" Model 700TR All Refrigerator (610) DOOR MOUNTING DETAIL DOOR / DRAWER CLOSED DOOR / DRAWER CLOSED Model 700TF All Freezer 80"* (2032) 19 1/2"* 25 1/2"* (495) 90˚ 3/8" 789/16"* (10) (1995) Model 700TFI All Freezer with Ice Maker 105˚ (648) 25 7/8" (657) 131/4" 1/2" (
INTEGRATED REFRIGERATION OVERALL DIMENSIONS Models 736TR and 736TC(I) 36" 24" (914) (UNIT DIMENSION) (610) (UNIT DIMENSION) TOP OF ROUGH OPENING 14"(356) A L L R E F R I G E R AT O R 15/16" (33) Model 736TR All Refrigerator 24" DOOR MOUNTING DETAIL (610) DOOR/DRAWER CLOSED DOOR/DRAWER CLOSED 80"* (2032) OVER-AND-UNDER Refrigerator | Freezer 191/2"* 341/2"* (495) 90˚ Model 736TC 3/8" 7713/16"* (10) (1976) 105˚ (876) Model 736TCI with Ice Maker 347/8" (886) 131/4" 1/2" (337) (13) DR
INTEGRATED REFRIGERATION OVERALL DIMENSIONS Models 700BR, 700BF(I) and 700BC(I) 3/8" 27" 24" (686) (UNIT DIMENSION) (610) (UNIT DIMENSION) (10) DRAWERS 131/4" 1/2" (337) (13) DRAWER MOUNTING DETAIL Model 700BR All Refrigerator 24" (610) 341/2"* 101/4" (876) 203/8" Model 700BF All Freezer DRAWER CLOSED (260) Model 700BFI All Freezer with Ice Maker 93/4" (518) (248) 191/2"* (495) 4" FRONT VIEW Model 700BC Refrigerator | Freezer SIDE VIEW (102) *1/2" (13) +_ ADJUSTMENT IN LEVELING L
INTEGRATED REFRIGERATION PANEL REQUIREMENTS Door and drawer panels must be a minimum of 5/8" (16) thick. The door panel cannot exceed 40 lbs (18 kg) and each drawer panel must not exceed 12 lbs (5 kg) for 27" (686) wide units. For 36" (914) wide units, the door panel weight limit is 53 lbs (24 kg) and 16 lbs (7 kg) for each drawer panel. CABINETRY APPLICATIONS FRAMED CABINETRY Integrated refrigeration is compatible with virtually any style and look of cabinetry.
INTEGRATED REFRIGERATION FRAMED CABINETRY – BEADED INSET APPLICATION The illustration below shows a 27" (686) wide Integrated base or tall unit installed within a framed cabinetry, beaded inset application. Review, giving particular attention to the overall panel specifications. Also refer to the full-scale illustrations at the end of this section for specifics on door openings. 27" (686) WIDE MODELS 24" Installation of a 27" (686) wide Integrated base or tall unit within framed cabinetry.
INTEGRATED REFRIGERATION FRAMED CABINETRY – BEADED INSET APPLICATION The illustration below shows 36" (914) wide Integrated tall unit installed within a framed cabinetry, beaded inset application. Review, giving particular attention to the overall panel specifications. Also refer to the full-scale illustrations at the end of this section for specifics on door openings. 36" (914) WIDE MODELS Installation of a 36" (914) wide Integrated tall unit within framed cabinetry.
INTEGRATED REFRIGERATION FRAMELESS CABINETRY 26 3/4"* (679) 24" PANEL WIDTH The illustrations show hypothetical installations of Integrated base or tall units within frameless cabinetry. Review, giving particular attention to the overall panel specifications. Also refer to the full-scale illustrations at the end of this section for specifics on door openings.
INTEGRATED REFRIGERATION PANEL CONSIDERATIONS The illustrations below provide panel width dimensions for installation of a single tall unit, 27" (686) and 36" (914) wide models. Illustrations on the following page provide panel width dimensions for installing two tall units side by side, 27" (686) wide models and 36" (914) wide models. IMPORTANT NOTE: The depth of each Integrated model is 24" (610) from the front of the unit to its back.
INTEGRATED REFRIGERATION PANEL CONSIDERATIONS As the reveal between cabinets and the Integrated unit decreases, the potential exists for severe finger pinching or crushing if a hand or fingers are placed in the opening when the door is closing. When 3/4" (19) or thicker panels are used and a reveal less than 1/4" (6) is maintained, the door panels may cause damage to the Sub-Zero unit when the door is open at the maximum 105˚ stop. You should use the built-in 90˚ stop to prevent damage.
INTEGRATED REFRIGERATION INSTALLATION OPTIONS The illustrations show some typical installations and their dimension considerations. The depth dimension in the illustrations may vary depending on cabinet styles, treatment of countertops or other design options. ACCESSORIES Optional accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Showroom Locator section of our website, subzero.com.
INTEGRATED REFRIGERATION DOOR PANEL HEIGHT TOE KICK CLEARANCE The height of the door panel can grow beyond 45 3/8" (1153) and exceed the 80" (2032) overall height, as long as you stay below the recommended door panel weight limit. The toe kick clearance can vary with the height of the lower drawer panel; the maximum panel height is 16 11/16" (424). The top illustration shows how the panel may grow and what you need to consider doing to finish the area in back of the door panel.
INTEGRATED REFRIGERATION FRAMED CABINETRY IMPORTANT NOTE: The depth of each Integrated model is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. DOOR CLOSED SUB-ZERO DOOR 105˚ MAXIMUM DOOR OPENING Full-scale (top view) 1/4 scale (top view) 24 (610) TO BACK OF UNIT LINE OF INTERFERENCE* LINE OF INTERFERENCE* AT MAXIMUM DOOR OPENING MOUNTING BRACKET SCREW 1 (3) MIN.
INTEGRATED REFRIGERATION FRAMELESS CABINETRY IMPORTANT NOTE: The depth of each Integrated model is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. SUB-ZERO DOOR 3/4" (19) DOOR COUNTERTOP PANEL SIDE PANEL 105˚ MAXIMUM DOOR OPENING DOOR CLOSED 1/4 scale (top view) Full-scale (top view) Adjacent side panel and countertop application. 24 (610) TO WALL 1 (3) MIN.
WINE STORAGE WINE STORAGE UNDERCOUNTER 15 1/8" 237/8" 241/4" (384) (606) (616) 34 1/16" 34" 343/16" (865) (864) (868) MODEL 315W MODEL 424 MODEL 424FS Built-In Built-In Free-Standing ALL WINE STORAGE 30" (762) 27" (686) Sub-Zero‘s innovative addition to its complete line of residential refrigeration is wine storage equipment—the ultimate in beauty, engineering, and attention to detail.
WINE STORAGE FEATURES AND OPTIONS When looking for wine storage, you no longer have to think only about an undercounter application. Sub-Zero offers you complete flexibility from the perspective of design applications and storage capabilities. Model 315W, a single-zone Wine Storage unit, comes as an overlay or classic stainless steel unit and is offered only with a glass door. Model 424 comes in the overlay and stainless steel door panel configurations.
WINE STORAGE MODEL 315W MODEL 424 MODEL 424FS UNDERCOUNTER B U I LT- I N UNDERCOUNTER B U I LT- I N UNDERCOUNTER FREE-STANDING MODEL OPTIONS MODEL OPTIONS MODEL OPTIONS Overlay Design 315W/O Overlay Design 424/O Full-View Glass Door (standard) Classic Stainless Steel 315W/S Classic Stainless Steel 424/S High Altitude Glass Door** Platinum Stainless Steel 424/P Carbon Stainless Steel S P E C I F I C AT I O N S Solid Door 424/B Overall Width 15 1/8" (384) Full-View Glass Door (standa
WINE STORAGE MODEL 427 MODEL 430 MODEL 427R ALL WINE STORAGE ALL WINE STORAGE W I N E S T O R A G E | R E F R I G E R AT O R MODEL OPTIONS MODEL OPTIONS Full-View Glass Door (standard) Framed Design 430/F Full-View Glass Door (standard) High Altitude Glass Door** Overlay Design 430/O High Altitude Glass Door** Solid Door Classic Stainless Steel 430/S Solid Door MODEL OPTIONS Platinum Stainless Steel 430/P Carbon Stainless Steel S P E C I F I C AT I O N S 430/B S P E C I F I C AT I O
WINE STORAGE ACCESSORIES Optional accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Showroom Locator section of our website, subzero.com. PLANNING INFORMATION ELECTRICAL REQUIREMENTS Review the Overall Dimensions and Installation Specifications illustrations for your Wine Storage model on the following pages.
WINE STORAGE OVERALL DIMENSIONS Undercounter Wine Storage 23 78 (606) 1 23 2 (597) DOOR FRAME 15 1/8" (384) 34 1/16" 30 1/16" (865) (764) 10 43 24 14 23 81 (587) 24 85 (625) (616) (CABINET DIMENSION) (CABINET DIMENSION) 3 *3416 3 *34 (273) CENTERED VERTICALLY (864) 30 16 (868) (767) DOOR FRAME 4 (102) 4" (102) 4 FRONT VIEW SIDE VIEW (102) TOE KICK FRONT VIEW *1/2" (13) +_ ADJUSTMENT IN LEVELING LEGS *1/2" (13) +_ ADJUSTMENT IN LEVELING LEGS MODEL 315W MODEL 424 MODEL 424FS
WINE STORAGE OVERALL DIMENSIONS All Wine Storage – Model 427 Wine Storage | Refrigerator – Model 427R 24 27 24 27 (686) (610) (686) (610) 26 81 (664) DOOR FRAME 14 (356) (UNIT DIMENSION) 26 81 (664) DOOR FRAME 14 (356) (UNIT DIMENSION) I N T E G R AT E D 13 16 (20) 13 16 (20) Model 427 All Wine Storage 44 87 (1139) Model 427R Wine Storage | Refrigerator 80 (273) CENTERED VERTICALLY (2032) 80 70167 10 43 OVERALL DIMENSIONS DOOR FRAME WITH HINGES 10 43 *78 85 (273) CENTERED VERTICA
WINE STORAGE OVERALL DIMENSIONS All Wine Storage – Model 430 30 5 23 87 (606) (762) 28 16 (719) DOOR FRAME ALL WINE STORAGE Model 430 Built-In 84 CENTERED VERTICALLY (2134) OVERALL DIMENSIONS Model 430 10 43 67 87 (273) (1724) Width DOOR FRAME 30" (762) Height 84" (2134) Depth 24" (610) Note the location of pre-drilled holes for optional handle hardware.
WINE STORAGE ACCESSORIES Optional accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Showroom Locator section of our website, subzero.com. DOOR PANELS MODEL 424FS – FREE-STANDING Unless you are installing a stainless steel model, you will need to provide a complete door panel in the instance of a solid door model, or a frame for the glass door application where wine will be seen from the outside.
WINE STORAGE OVERLAY PANELS – MODELS 315W | 424 The overlay panel applied to Models 315W and 424 should not be confused with the Built-In overlay panel application. The overlay panel will consist of only a frame and would be either the 5/8" (16) or 3/4" (19) thick panel you may be using. It is affixed directly to the door itself with screws through a series of pre-drilled holes in the perimeter of the door itself. You do not need any backer or spacer panel.
WINE STORAGE INTEGRATED PANELS – MODELS 427 | 427R ACCESSORIES Optional accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Showroom Locator section of our website, subzero.com. The integrated full panels or frame panels for glass doors for these models will follow some of the identical planning processes used with the Integrated line. The installation of the door panels is completely different, however.
WINE STORAGE INTEGRATED PANELS – MODELS 427 | 427R IMPORTANT NOTE: The dimensions of these panels and stiles are assuming the models finish off at 80" (2032) in height overall and have a 4" (102) toe kick for the Model 427. If you finish off at 84" (2134), for instance, you must add 4" (102) additional to the overall height of the panel and remember to add 4" (102) to the top rail. Likewise, if you allow for a 6" (152) toe kick for the Model 427, you must subtract 2" (51) from the bottom rail.
WINE STORAGE MODEL 430 – FRAMED PANELS MODEL 430 – OVERLAY PANELS You cannot use a 1/4" (6) panel to cover the glass door of a framed Model 430. It is fine when applying a panel to the solid door, but in either instance, you should consider using raised panels with a minimum 5/8" (16) thickness. Your overlay model will be shipped without handle hardware and with an 11" (279) overlay panel grille as standard equipment.
WINE STORAGE MODEL 430 – OVERLAY PANELS As with the Sub-Zero Built-In models, you have the flexibility of ordering grilles in a variety of heights for either the framed or overlay application. Optional panel grille dimensions for the framed Model 430 are the same as listed for Built-In Models 611 and 611G on page 21. Overlay grille panel dimensions for the overlay Model 430, standard 11" (279) grille, are listed below. Refer to page 25 for optional grille height dimensions.
WINE STORAGE ACCESSORIES Optional accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Showroom Locator section of our website, subzero.com. HARDWARE CONSIDERATIONS WINE SHELF WOOD FACING With Models 315W and 424 (overlay), Models 427 and 427R (integrated) and the Model 430 (overlay), you must supply your own handle hardware.
WINE STORAGE DOOR FRAME PROFILE DOOR FRAME HANDLE OFFSET Wine Storage Models Glass Cabinet Door Profile CL A Dimension A Model 315W 1" (25) Model 424 1" (25) Model 427 7/ 8" (22) Model 427R 7/ 8" (22) Model 430 15/16" (24) IMPORTANT NOTE: Rails and stiles must be a minimum of 2 1/4" (57) wide (except for the rails of Models 427 and 427R, which must be wide enough to cover the door hinges).
WINE STORAGE MODEL 424 – DOOR CLOSED AND 145˚ MAX OPENING 24 (610) CABINETRY OPENING 1 238 (587) TO BACK OF APPLIANCE *MODEL 424 MUST EXTEND A MINIMUM 1/4" (6) BEYOND THE FRONT SURFACE OF ADJOINING CABINETRY TO ALLOW THE MAXIMUM DOOR SWING SUB-ZERO DOOR 3 4 (19) 1 2 (13) DOOR PANEL 1 4 (6)* 3 23 4 (600) 1 (3) 8 DOOR PANEL WIDTH DOOR PANEL 145˚* The full-scale illustration shows what considerations you need to make for the installation of Model 424 and how the maximum door opening may interact
UNDERCOUNTER REFRIGERATION NEW UNDERCOUNTER REFRIGERATION Available in 2007 Aside from the full-size models that Sub-Zero offers in its Built-In and Integrated lines of refrigeration and its Wine Storage equipment, we round out our product line-up with a new line of Undercounter refrigeration available in 2007.
UNDERCOUNTER REFRIGERATION MODEL UC-24R NEW A L L R E F R I G E R AT O R MODEL UC-24B NEW BEVERAGE CENTER MODEL UC-24C NEW C O M B I N AT I O N R E F R I G E R AT O R | F R E E Z E R Energy Star Qualified MODEL OPTIONS Available Fall 2007 Overlay Design UC-24B/O Classic Stainless Steel UC-24B/S Full-View Glass Door (standard) High Altitude Glass Door** S P E C I F I C AT I O N S S P E C I F I C AT I O N S S P E C I F I C AT I O N S Overall Width 23 7/8" (606) Overall Width 23 7/8" (6
UNDERCOUNTER REFRIGERATION MODEL UC-24RO MODEL 315I NEW ICE MAKER A L L R E F R I G E R AT O R OUTDOOR MODEL Energy Star Qualified MODEL OPTIONS Available Summer 2007 Drain Pump Model 315IP S P E C I F I C AT I O N S S P E C I F I C AT I O N S ACCESSORIES Overall Width 23 7/8" (606) Overall Width 15 3/16" (386) Overall Height 34" (864) Overall Height 33 5/8" (854) Overall Depth 24" (610) Overall Depth 24" (610) Refrigerator Capacity 5.
UNDERCOUNTER REFRIGERATION UNDERCOUNTER FEATURES Overlay Application. The overlay application blends seamlessly into your overall room design and complements surrounding cabinetry. You add the decorative door front panel and hardware. Sub-Zero accessories handles are available. The overlay application is available for all Undercounter models except Model UC-24RO. Model UC-24B must be ordered specifically as overlay (UC24-B/O).
UNDERCOUNTER REFRIGERATION PLANNING INFORMATION ELECTRICAL REQUIREMENTS Refer to the Installation Specifications for information regarding area requirements, minimum door clearance, placement of electrical and plumbing for Sub-Zero Undercounter models. A 115 V AC, 60 Hz, 15 amp circuit breaker and electrical supply are required. A separate circuit, servicing only this appliance is required. The Model 315I can be ordered with or without a pump.
UNDERCOUNTER REFRIGERATION I N S TA L L AT I O N S P E C I F I C AT I O N S Models UC-24R, UC-24B, UC-24C and UC-24RO 2" (51) 15 1/2" (394) 1/2" (13) LOCATE WATER LINE (MODEL UC24C ONLY) WITHIN SHADED AREA Overall Dimensions Overall Width 23 7/8" (606) Overall Height 34" (864) Overall Depth 24" (610) 24" (610) ROUGH OPENING DEPTH TOP VIEW Finished Opening Dimensions Opening Width 24" (610) Opening Height 34 1/2" (876) Opening Depth 24" (610) Door Swing Clearance 25 3/8" 24" (610) ROUGH O
UNDERCOUNTER REFRIGERATION MODEL 315I(P) – GRAVITY DRAIN OR DRAIN PUMP The Undercounter ice maker can be ordered with a pump (Model 315IP) or without a pump (Model 315I). The model without a drain pump drains its water by gravity. However, the gravity drain model may be converted to a pump model through the installation of a drain pump kit and drain pump. Specific step-by-step instructions are included with the drain pump kit. Contact your Sub-Zero dealer for specifics.
UNDERCOUNTER REFRIGERATION OVERLAY PANEL – MODELS UC-24R AND UC-24C The overlay door panel design allows for a decorative panel to cover the door trim for a seamless appearance that will compliment surrounding cabinetry. You may also choose to match the handle hardware of surrounding cabinetry. I N S TA L L AT I O N To install framed or overlay panels, see the detailed procedures outlined in the Sub-Zero Undercounter Installation Instructions.
UNDERCOUNTER REFRIGERATION DOOR FRAME PROFILE – MODEL UC-24B Glass FULL-SCALE T E M P L AT E S Door Panel Profile CL 1" (25) The full-scale illustration shows the door frame profile for Model UC-24B. 1" (25) IMPORTANT NOTE: Rails and stiles must be a minimum of 2 1/4" (57) wide. The back sides of rails and stiles that will be visible through the glass door will need to be finished.
UNDERCOUNTER REFRIGERATION UNDERCOUNTER DOOR CLOSED AND 145˚ MAX OPENING The full-scale illustration shows what considerations you need to make for the installation of the Undercounter unit and how the maximum door opening may interact with adjacent cabinets and countertops.
SUB-ZERO PRODUCTS LIMITED WARRANTY RESIDENTIAL USE ONLY FULL FIVE YEAR SEALED SYSTEM WARRANTY LIMITED SIXTH THROUGH TWELFTH YEAR WARRANTY ON THE SEALED SYSTEM FULL TWO YEAR WARRANTY ON TOTAL PRODUCT* FULL FIVE YEAR SEALED SYSTEM WARRANTY For five years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system.
SUB-ZERO OUTDOOR PRODUCTS LIMITED WARRANTY RESIDENTIAL USE ONLY FULL FIVE YEAR SEALED SYSTEM WARRANTY FULL ONE YEAR WARRANTY ON TOTAL PRODUCT* FULL FIVE YEAR SEALED SYSTEM WARRANTY For five years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system. The sealed system consists of the compressor, condenser, evaporator, drier and all connecting tubing.
The information and images in this guide are the copyright property of Sub-Zero, Inc. Neither this book nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Sub-Zero, Inc. ©Sub-Zero, Inc. all rights reserved.
SUB-ZERO, INC. P. O. BOX 44130 MADISON, WI 53744 -4130 800.222.7820 SUBZERO.
