Installation Guide

7
Dimensions in parentheses are in
millimeters unless otherwise specified.
UNDERCOUNTER INSTALLATION INSTRUCTIONS
DOOR PANEL INSTALLATION
MODELS UC-24R AND UC-24C
M
odels UC-24R and UC-24C can be fitted with
a custom overlay or stainless steel door front
panel. A classic stainless steel door panel with
t
ubular handle is available as a sales acces-
sory. Installation of the stainless steel panel
will be required.
For the overlay application, a decorative door
panel and handle hardware must be provided.
You can match your handle hardware with
surrounding cabinetry or use a Sub-Zero
accessory handle. Handles must be attached
directly to the overlay panel.
The overlay application requires a decorative
door panel 23
3
/4" (603) by 30
1
/16" (764). The
overlay panel must be a minimum of
5
/8" (16)
thick and has a weight limit of 20 lbs (9 kg).
Installation of the overlay door panel for
Models UC-24R and UC-24C is outlined on the
following pages.
OUTDOOR MODEL UC-24RO
Model UC-24RO is shipped from the factory
with the classic stainless steel door panel and
tubular handle in place. No panel installation is
required.
IMPORTANT NOTE: Model UC-24RO must be
built into cabinetr
y and cannot be used in a
free-standing application.
GLASS DOOR MODEL UC-24B
T
he classic stainless steel Model UC-24B/S is
shipped from the factory with the classic stain-
less steel door panel and tubular handle in
p
lace. No panel installation is required.
For the overlay Model UC-24B/O, a decorative
frame door panel must be provided to
surround the glass. The door panel must be
23
3
/4" (603) by 30
1
/16" (764) with rails and stiles
a minimum of 2
1
/4" (57) wide. The overlay
panel must be a minimum of
5
/8" (16) thick and
has a weight limit of 10 lbs (5 kg). Installation
of the overlay door panel for Model UC-24B/O
is outlined on the following pages.
You may also use your own handle hardware
to match surrounding cabinetry. If you do not
use the pre-drilled holes on the door of the
unit, you will need to attach the handle directly
to the overlay panel.
IMPORTANT NOTE: For installations at or
above 5,000' (1524 m) in altitude, a special
high altitude glass door unit must be ordered.
A solid panel must not be installed on a
glass door unit, as this may cause
moisture to form behind the panel.