Integrated Refrigeration Design Guide
Contents 3 Integrated Refrigeration 4 Specifications 8 Custom Panels 11 Full-Scale Template 13 Warranty Models 700TR and 700TFI. Features and specifications are subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information. IMPORTANT NOTE: Throughout this guide, dimensions may vary by ± 1/8" (3). Dimensions in parentheses are millimeters unless otherwise specified.
INTEGRATED REFRIGERATION Integrated Refrigeration With custom front panels and hardware, Sub-Zero invented integrated columns, tall and drawer models that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration as practical and beautiful in the master suite, bar or theatre room as in the kitchen. KEY FEATURES • Custom front panels and hardware allow for infinite design options. • Point-of-use refrigeration that can be placed anywhere in the home.
INTEGRATED REFRIGERATION Specifications Overall Dimensions COLUMN INTERIOR CAPACITY COLUMN IC-27R IC-27FI TALL R CU FT (L) 27" (686) F CU FT (L) 1 5/8" 15.5 (439) 10.2 (289) 20.9 (592) 21.5 (609) 7.1 (201) DRAWER R CU FT (L) F CU FT (L) 700BR 700BF(I) 700BC(I) 5.3 (150) 2.9 (82) (41) 15.3 (433) 5.1 (144) 13.3 (377) 24" (610) 14" (356) 15.7 (445) R CU FT (L) 700TR 700TFI 700TCI 736TR 736TFI 736TCI F CU FT (L) 16.3 (462) 78 9/16" (1995) 81" (2057) TO TOP OF OPENNG 5.1 (144) 2.
INTEGRATED REFRIGERATION Overall Dimensions TALL DRAWER W 24" (610) 27" (686) 3/8" (10) 14" (356) 13/16" (21) 1/2" (13) 24" (610) 13 1/4" (337) 34 1/2" (876) 10 1/4" 78 9/16" (260) (1995) 20 3/8" (518) 9 3/4" (248) 80" (2032) TO TOP OF OPENNG 3/8" (10) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 13 1/4" 1/2" (13) (337) 24" 34 1/2" 10 1/4" (610) (876) (260) 20 3/8" (518) 9 3/4" (248) 4" HEIGHT DIMENSIONS ± 1/2" (13) 191/2" (102) (495) 25 7/8" (657) 24" (610) A 191/2" (495
INTEGRATED REFRIGERATION Opening Dimensions INTEGRATED MODELS OPENING DIMENSIONS COLUMN IC-27R, IC-27FI 25" (635) OPENING DEPTH W H 27" (686) 81" (2057) TALL 700TR, 700TFI, 700TCI 736TR, 736TFI, 736TCI W H 27" (686) 36" (914) 80" (2032) 80" (2032) DRAWER TOP VIEW 700BR, 700BF(I), 700BC(I) W H 27" (686) 34 1/2" (876) The depth of each integrated model is 24" (610). Allow for panel thickness when planning the finished opening depth.
INTEGRATED REFRIGERATION Electrical Plumbing The electrical supply must be located within the shaded area shown in the illustration and chart below. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. The water supply line should be located within the shaded area shown in the illustrations below.
INTEGRATED REFRIGERATION Custom Panels For integrated models, custom door panels and handle hardware must be provided. Refer to the panel requirements chart and integrated panel dimensions. INTEGRATED PANEL DIMENSIONS The thickness of the custom panel can vary. A minimum 5/8" (16) thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each integrated model is 24" (610). Allow for panel thickness when planning the finished opening depth.
INTEGRATED REFRIGERATION Custom Panels DOOR PANEL HEIGHT TOE KICK CLEARANCE The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below. The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below.
INTEGRATED REFRIGERATION Handle Hardware Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Refer to the chart below for the length and stud spacing of standard handles for integrated models.
INTEGRATED REFRIGERATION INTEGRATED DOOR INTEGRATED MAXIMUM 105° OPENING DOOR MAXIMUM 105° OPENING Maximum Door Opening FULL-SCALE TEMPLATE If the panel is thicker than 3/4" (19), use the built-in 90° door stop to prevent damage to the panel and face frame at the maximum door opening. LINE OF INTERFERENCE LINE OF INTERFERENCE 105° opening—1/4 scale (top view).
Sub-Zero Residential Limited Warranty FOR RESIDENTIAL USE FULL TWO YEAR WARRANTY* For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc.
Sub-Zero, Sub-Zero & Design, Dual Refrigeration, Constant Care, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service marks of Sub-Zero, Inc. Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc. (collectively, the “Company Marks.
SUB-ZERO, INC. P.O. BOX 44848 MADISON, WI 53744 SZIN700DG 9 / 2013 SUBZERO.COM 800.222.
