User Guide

4
WOLF PRO VENTILATION HOOD LINERS
ELECTRICAL REQUIREMENTS
Wolf Pro ventilation hood liners require a
separate, grounded 110/120 V AC, 60 Hz power
supply. The service should have its own 15
amp circuit breaker. Locate the electrical
supply within the shaded area shown in the
Installation Specifications illustration on
the following page.
You must follow all National Electrical Code
regulations. In addition, be aware of local
codes and ordinances when installing your
service.
ACCESSORIES
Optional acces-
sories are available
through your
Wolf dealer. To
obtain local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
INSTALLATION CONSIDERATIONS
IMPORTANT NOTE: Wolf Pro ventilation hood
liners are recommended for use with all Wolf
cooking appliances and are available to accom-
modate 30" (762), 36" (914), 42" (1067), 48"
(1219), 54" (1372) and 60" (1524) wide hoods.
Proper installation is the responsibility
of the installer. Product failure due to
improper installation is not covered
under the Wolf Warranty. Refer to the Wolf
Pro Ventilation Hoods Use & Care
Information for warranty details, or visit
the Contact/ Help section of our website,
wolfappliance.com.
Make sure you have the tools and materials
necessary for proper installation.
Any required service must be performed by
a Wolf authorized service center. Wolf is not
responsible for service required to correct a
faulty installation.
IMPORTANT NOTE: Wolf Pro ventilation hood
liners (except Model L282212I) are shipped
without the blower assembly. Wolf internal,
in-line and remote blower assemblies are
available, refer to page 14. Use only a Wolf
blower with the Pro hood liner
IMPORTANT NOTE: Wolf recommends that
the Pro ventilation hood liner be installed
30" (762) to 36" (914) above the countertop.