Installation Guide

subzero.com | 11

Alignment

LEVELING

Once the unit is in position, turn the front leveling legs

clockwise to adjust the height. The rear height adjustment

can be made from the front of the roller base. Using a

/8"

socket, turn the

/8" hex bolt clockwise to raise the unit or

counterclockwise to lower. Use the lowest torque setting

when using a power drill. Do not turn the rear leveling legs

by hand. Refer to the illustration below.

When the unit is properly leveled, door and drawer adjust-

ments are less likely to be necessary.

IMPORTANT NOTE: Level the unit to the oor, not the sur-

rounding cabinetry. This could affect the operation of the

unit, such as door closing.

INSTALLATION

FRONT

LEVELING LEG

REAR

ADJUSTMENT

Leveling

WARNING

To reduce the possibility of the unit tipping forward, the

front leveling legs must be in contact with the oor.