User Guide

REMOVING THE RANGETOP
I
f removing the gas rangetop is necessary for
cleaning or service, shut off the gas supply.
Disconnect the gas supply and electrical
connections to the unit, then remove the
rangetop. Reinstall in the reverse order and be
sure to check the gas connection for leaks.
Refer the Wolf Gas Rangetops Use & Care
Information included with the rangetop for
cleaning recommendations.
Be sure to disconnect the gas supply and
electrical connections before removing
the rangetop.
14
WOLF GAS RANGETOPS
TROUBLESHOOTING
IMPORTANT NOTE: If the gas rangetop
does not operate properly, follow these
t
roubleshooting steps:
V
erify that power is being supplied to the
rangetop.
Check the gas supply and electrical
connections to ensure that the installation
has been completed correctly.
Check that gas valves are turned to the ON
position.
Check polarity of the electrical outlet should
nuisance clicking of igniters occur after a
burner is lit.
If the rangetop still does not work, contact a
Wolf authorized service center. Do not
attempt to repair the rangetop yourself.
Wolf is not responsible for service required
to correct a faulty installation.