User Guide

11
WOLF ELECTRIC COOKTOP USE & CARE
INITIAL
START-UP
Before operating the cooktop, please read the
entire Use & Care Information.
Clean the cooktop surface as outlined in the
G
lass Ceramic Top Cleaning section on page
14. The cooktop surface must be free of any
foreign substance, especially those that could
m
elt and permanently adhere to the glass.
During the first uses of your new electric
cooktop, you may smell a slight burning odor
or see light smoke. Both of these conditions
are normal in new glass ceramic cooktops.
HOT SURFACE INDICATORS
As an additional safety precaution, hot surface
indicator lights will illuminate when the
s
urface temperature of the glass is above
150˚F (65˚C). Each heating element has an
independently controlled light located to the
r
ight of that element as shown in the
illustration below. Even if the cooktop controls
are turned off, you are alerted to any area of
the cooktop that remains hot.
Hot surface indicators
Location of
indicator
Do not set griddles or oversized pans on
the hot surface indicator lights. This may
make them bur
n out prematurely.
Make sure that the cooktop surface is
clean and dry before operating.
Do not place hot cooking utensils directly
over the control panel.
Dimensions in parentheses are in
millimeters unless other
wise specified.