User Guide

12
WOLF ELECTRIC COOKTOPS
VENTILATION OPTIONS
IMPORTANT NOTE: It is recommended that
you operate the Wolf electric cooktop with
e
ither a Wolf cooktop ventilation hood, down-
draft system or Pro ventilation hood. Contact
your Wolf dealer for details.
Cooktop Wall Hood – 30" (762) or 36" (914)
w
idths in classic stainless steel.
Cooktop Island Hood – 42" (1067) width in
classic stainless steel.
Downdraft Ventilation System – 30" (762)
or 36" (914) widths, with top cover and
control panel in classic, platinum and
carbon stainless steel finishes. Not for use
with Model CT30EU or Model CT36EU.
Pro Wall Hood – 22" (559), 24" (610) or 27"
(686) depths and 30" (762) to 66" (1676)
widths in classic stainless steel.
Pro Island Hood – 36" (914) to 66" (1676)
widths in classic stainless steel.
Pro Hood Liner – available in widths to
accommodate 30" (762) to 60" (1524) hoods.
All hoods have welded seams, sealed halogen
lighting and removable, dishwasher-safe
filters.
Blower requirements may vary due to the
length of ducting and number of angles. The
basic recommendation is 1 CFM per 100 Btu/hr
(1 kW equals 3,415 Bt
u
/hr). Always consult
your HVAC professional for more concise
blower r
equirements.
IMPORTANT NOTE: When installing a ventila-
tion hood, refer to the specific requirements
of the hood for the minimum dimension to
countertop.
MULTIPLE COOKTOP INSTALLATION
If the framed electric cooktop is to be used
with any combination of additional cooktop
u
nits or modules with a filler strip, the cut-out
width is calculated by adding the correspon-
ding units' cut-out dimensions plus 1
1
/4" (32)
f
or each additional unit. For Model CT15E, the
cut-out width should be increased from 13
3
/8"
(340) to 14" (356) when installed with multiple
units. Refer to the illustration below.
IMPORTANT NOTE: Unframed electric
cooktops Models CT30EU and CT36EU are not
designed to be installed in combination with
other cooktop units.
IMPORTANT NOTE: When multiple units are
installed side by side, each unit must have its
own separate recommended electrical circuit.
When two or more modules are installed
together, an integrated module filler strip
(IFILLER) is required. If a downdraft ventilation
system is also installed, an integrated module
support for downdraft ventilation (ISUPPORT)
is also required. Contact your Wolf dealer for
information on these accessory components.
2
1
/2"min
(64)
FRONT OF COUNTERTOP
19
1
/4"
(489)
CUT-OUT
DEPTH
29
1
/4" (743)
TWO MODULES WIDTH
44
1
/2" (1130) THREE MODULES WIDTH OR
44
1
/4" (1124) 30" COOKTOP AND ONE MODULE
59
3
/4" (1518) FOUR MODULES WIDTH OR
59
1
/2" (1511) 30" COOKTOP AND TWO MODULES OR
50
1
/4" (1276) 36" COOKTOP AND ONE MODULE
14"
(356)
CUT-OUT
WIDTH
Countertop cut-out dimensions for installation of multiple cooktops
ACCESSORIES
Optional acces-
sories are available
through your
Wolf dealer. To
obtain local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.