User Guide

ISLAND | PENINSULA INSTALLATIONS
F
or island installations,
t
he range should
not be installed within an enclosure having an
adjacent rear wall less than 12" (305) from
t
he rear of the unit that rises above the
countertop.
For peninsula installations, the range must
have a 6" (152) minimum clearance to the side
wall, left or right side, and 12" (305) minimum
clearance to the rear wall.
Refer to the Installation Specifications
illustration for your model on pages 7–10 for
the exact rough opening dimensions.
6
WOLF DUAL FUEL RANGES
INSTALLATION SPECIFICATIONS
MINIMUM CLEARANCES
I
MPORTANT NOTE:
C
aution must be used in
planning the proper installation of the Wolf
dual fuel range to avoid fire or damage to
a
djacent cabinetry or kitchen equipment.
Be sure to follow the minimum clearances
established in the finished rough opening
dimensions.
Refer to the Installation Specifications
illustration for your model on pages 7–10 for
the exact rough opening dimensions.
Maintain the following clearances to
combustible materials:
Minimum 18" (457) clearance from bottom
of upper cabinet to countertop, within 6"
(152) minimum side clearance.
Minimum 30" (762) clearance between
countertop and bottom of wood or metal
cabinet, which is protected by not less than
1
/4" (6) flame retardant millboard covered
with not less than No. 28 MSG sheet steel,
.015" (.4) stainless steel, or .024" (.6)
aluminum or .02" (.5) copper.
Minimum 36" (914) clearance between
countertop and bottom of an unprotected
wood or metal cabinet.
Bottom of ventilation hood must be 30"
(762) minimum to 36" (914) maximum fr
om
countertop.
Failure to locate the range without the
proper clearances will r
esult in a fire
hazard.