Use and Care Guide

18 | Sub-Zero Customer Care 800.222.7820
Product Operation
Ice Maker
To operate the ice maker:
1 To turn on the ice maker, touch on the options
screen. A single highlighted cube indicates the ice
maker is turned on.
indicates the max ice feature
is turned on.
2 To turn o the ice maker, touch until no cubes are
highlighted.
After initial start-up, discard the first few batches of ice.
The ice may contain impurities from new plumbing con-
nections.
Max ice increases ice production up to 30% for a 24-hour
period. During that period, some components may run at
a higher speed resulting in a unique audible tone. This is
typical and will revert back after 24 hours or when the ice
bin is full.
Ice may fuse together if not used regularly. To avoid, dis-
card the ice and allow the ice maker to replenish.
Turn o the ice maker if the ice bin is removed for an
extended period. The unit is equipped with a 3-minute
delay after the ice bin is removed, to ensure cubes are not
ejected before the ice maker is turned o or the ice bin is
installed.
Night Mode
Night mode automatically reduces interior light brightness
when low ambient light is detected.
appears in the
upper-left corner of the control panel display when night
mode is turned on.
appears when low ambient light is detected. The
interior light brightness remains reduced for three minutes,
even if the ambient light changes. Touch
to increase
brightness.
To turn night mode on or o:
1 Touch .
2 Touch .