Design Guide

60 | Sub-Zero Customer Care 800.222.7820
Wine Storage
Opening Dimensions
DESIGNER SERIES WINE STORAGE
OPENING DIMENSIONS W*
18" Column 18" (457)
24" Column 24" (610)
30" Column / Tall 30" (762)
*For stainless steel side panel accessory, add 1" (25) per panel to
opening width.
The depth of each model is 24" (610). Allow for panel thick-
ness when planning the finished opening depth. A mini-
mum 3⁄"
(89) finished return is required on all sides of the
opening. Framed cabinets will require additional finished
filler material behind the face frame for a proper installa-
tion. Refer to the illustration.
DUAL INSTALLATION
The unit can be installed next to an Designer Series refrig-
eration model or another Designer Series wine storage
model in a dual installation. When installing two units side
by side, the opening width is the width of the two units
added together. A dual installation kit is required for this
installation. If a dual installation kit is not specified, a mini-
mum 2"
(51) filler strip is required between the units.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the
find a showroom section of our website, subzero.com.
For questions regarding the installation, call Sub-Zero
Customer Care at 800-222-7820.
W
OPENING WIDTH
84"
(2134)
OPENING
HEIGHT
NOTE: 3
1
/2" (89) finished returns will be visible and should be finished to match cabinetry.
SIDE VIE
W
TOP VIEW
FRONT VIEW
3
/4" (19)
TYPICAL
FRAMED
CABINETRY
W
FILLER
3
1
/2" (89)
FINISHED
RETURN
FRAMELESS
CABINETRY
W
3
/4" (19)
TYPICAL
3
1
/2" (89)
FINISHED
RETURN
25" (635)
OPENING
DEPTH