Design Guide

subzero.com | 25

Dual Installation

If two units are installed side by side, a dual installation kit

may be required. Installations without a custom ﬁller strip

require a dual installation kit. If a dual installation kit is not

speciﬁed, a 2"

(51) ﬁller strip is recommended between the

units. A custom ﬁller strip is required when installing two

French door or side-by-side models. Dual installations

without a ﬁller strip can only be accomplished using two

84"

(2134) units with opposite hinges. Refer to the illustra-

tions below.

Dual installation kits are available through an authorized

Sub-Zero dealer. For local dealer information, visit the

ﬁnd a showroom section of our website, subzero.com.

For questions regarding the installation, call Sub-Zero

Customer Care at 800-222-7820.

WITHOUT FILLER STRIP

FILLER STRIP

Opposite hinges

Same side hinges

For dual standard installations, panel dimensions are the

same as for single installations. Refer to the charts on

pages 20–23. Panel dimensions and osets for dual ﬂush

inset installations are listed on the following pages.

Classic Series Refrigeration