User Guide

ManualsBrandsSub-Zero ManualsOther736TR-PS

Planning Information

Integrated Model 736TR

All Refrigerator

Dimensions in parentheses are in

millimeters unless otherwise specified.

11/06

emovable

risper cover

Front venting with

removable kickplate

djustable glass

helf and deli drawer

Adjustable spill-proof

glass shelves

lectronic digital

ontrol panel

Adjustable dairy

compartment

eamless

olding

Magnetic door /

drawer gaskets

ocation of serial

umber

Egg container

odel 736TR

djustable door

helves

The Sub-Zero Model 736TR integrated

design accepts custom wood or stainless

steel door and dr

awer panels. Stainless

steel panels and handles are available as

sales accessories in three finishe

—

classic

, platinum and carbon.

The Integr

ated line of refrigeration is growing—literally

and figur

atively. We’ve introduced the Model 736TC(I)

tall combination unit, now we are offering a 36" (914)

wide all refrigerator unit, the Model 736TR. Yes, that’s

correct, the Integrated line is not only 27" (686) wide,

now you can you can expand your choices to 36" (914)

wide models.

With this model, you can adjust the door cabinet

temperature independent of the two drawer environ-

ment. The r

ange for both compartments is 34˚F (1˚C)

to 45˚F (7˚C).

All of the panel specifications are identical to the 27"

(686) wide tall models, except they have gr

own 9"

(229) wider.

Stationary shelf

Lower refrigerator

storage drawer

Upper refrigerator

storage drawer

With the installation of a harness kit, these appliances are Star-K

compliant to meet strict religious regulations in conjunction with

specific instructions found on star-k.org. You may purchase this

harness kit through your Sub-Zero dealer. To obtain local dealer

information, visit the Locator section of our website, subzero.com.

Summary of content (15 pages)

PAGE 1
Planning Information Integrated Model 736TR All Refrigerator Electronic digital control panel Seamless molding Adjustable spill-proof glass shelves Adjustable dairy compartment Adjustable glass shelf and deli drawer Adjustable door shelves Stationary shelf Egg container Location of serial number Removable crisper cover Model 736TR Magnetic door / drawer gaskets Upper refrigerator storage drawer Front venting with removable kickplate Lower refrigerator storage drawer With the installation of
PAGE 2
Planning Information Integrated Model 736TR F E AT U R E S Tall 36" (914) wide all refrigerator unit with upper cabinet refrigerator and refrigerator storage drawers Integrated design for "point-of-use" refrigeration anywhere in the home Refrigeration system with two distinct temperature zones ensures the freshest food and energy efficiency Electronic digital controls are up front and easy to use Flat to the ceiling bright lighting in cabinet and drawers Door alarm will let you know with an audible beepi
PAGE 3
Planning Information Integrated Model 736TR S P E C I F I C AT I O N S MODEL OPTIONS Tall Refrigerator Unit 736TR Model 736TR Upper Cabinet Refrigerator with Refrigerator Drawers Overall Width 36" (914) Overall Height 80" (2032) Overall Depth 24" (610) Refrigerator Capacity 21.
PAGE 4
Planning Information Integrated Model 736TR I N S TA L L AT I O N S P E C I F I C AT I O N S TOP VIEW 11/2" (38) ANTI-TIP BRACKET* 18" (457) 25" (635) *PLACEMENT OF THE ANTI-TIP BRACKET SHOULD BE 24" (610) FROM THE FRONT OF THE UNIT WITHOUT PANELS TO THE BACK OF THE ANTI-TIP BRACKET.
PAGE 5
Planning Information Integrated Model 736TR I N S TA L L AT I O N N OT E S Refer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics. IMPORTANT NOTE: The depth of Model 736TR is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635). Refer to the installation illustration.
PAGE 6
Planning Information Integrated Model 736TR C A B I N E T RY A P P L I C AT I O N S Integrated refrigeration is compatible with virtually any style and look of cabinetry. The models can be used with framed as well as frameless cabinets. Because of the precise application and the look you may want to achieve, there are important questions you need to answer before ordering panels for the doors and/or drawers.
PAGE 7
Planning Information Integrated Model 736TR F R A M E D C A B I N E T RY A P P L I C AT I O N S Framed cabinetry applications present you with different questions to address. The illustrations on this page show common applications of framed cabinetry. These are not meant to be the only alternatives, but are suggestions from designers around the country. Also refer to the fullscale illustrations at the end of this section for specifics on door openings.
PAGE 8
Planning Information Integrated Model 736TR F R A M E D C A B I N E T RY – B E A D E D I N S E T A P P L I C AT I O N 24" (610) SUB-ZERO UNIT CABINET DOOR TO WALL The illustration shows an Integrated 36" (914) wide tall unit installed within a framed cabinetry beaded inset application. IMPORTANT NOTE: Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly.
PAGE 9
Planning Information Integrated Model 736TR F R A M E L E S S C A B I N E T RY A P P L I C AT I O N S The illustration below shows a hypothetical installation of an Integrated 36" (914) wide tall unit within frameless cabinetry. Review the illustration, giving particular attention to the overall panel specifications. Also refer to the fullscale illustrations at the end of this section for specifics on door openings. FRAMELESS CABINETRY IMPORTANT NOTE: Dimensions are based on a 1/8" (3) reveal.
PAGE 10
Planning Information Integrated Model 736TR PA N E L C O N S I D E R AT I O N S The illustrations below provide panel width dimensions for installation of a 36" (914) wide tall unit and for installing two 36" (914) wide tall units side by side. When 3/4" (19) or thicker panels are used and a reveal less than 1/4" (6) is maintained, the door panels may cause damage to the Sub-Zero unit when the door is open at the maximum 105˚ door stop. You should use the built-in 90˚ door stop to prevent damage.
PAGE 11
Planning Information Integrated Model 736TR CABINETS 25 (635) I N S TA L L AT I O N O P T I O N S 36 (914) TOP VIEW Installation without side3 panels. C The illustrations on this page show some typical installations and their dimension considerations. The depth dimension in the illustrations may vary depending on cabinet styles, treatment of countertops or other design options. IMPORTANT NOTE: The depth of each Integrated unit is 24" (610) from the front of the unit to its back.
PAGE 12
Planning Information Integrated Model 736TR D O O R PA N E L H E I G H T The height of the door panel can grow beyond 45 3/8" (1153) and exceed the 80" (2032) overall height, as long as you stay below the recommended door panel weight limit of 53 lbs(24 kg). The illustration below shows how the panel may grow and what you need to consider doing to finish the area in back of the door panel.
PAGE 13
Planning Information Integrated Model 736TR TOE KICK CLEARANCE The toe kick clearance can vary with the height of the lower drawer panel; the maximum panel height is 16 11/16" (424). IMPORTANT NOTE: You must keep a minimum space of 4" (102) clear below the bottom edge of the lower drawer panel so the unit can be properly vented. In addition, any decorative base molding must be removable for possible servicing and cleaning of the condenser.
PAGE 14
Planning Information Integrated Model 736TR SUB-ZERO DOOR FRAMED CABINETRY IMPORTANT NOTE: The depth of each Integrated unit is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. 24 T (610) TO BACK OF UNIT LINE OF INTERFERENCE* 105˚ maximum door opening – 1/4 scale (top view) LINE OF INTERFERENCE* AT MAXIMUM DOOR OPENING MOUNTING BRACKET SCREW 1 (3) MIN.
PAGE 15
Planning Information SUB-ZERO DOOR Integrated Model 736TR 3/4" (19) DOOR COUNTERTOP PANEL SIDE PANEL FRAMELESS CABINETRY IMPORTANT NOTE: The depth of each Integrated unit is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. 24 (610) TO WALL LINE OF INTERFERENCE* 105˚ maximum door opening – 1/4 scale (top view) Adjacent side panel and countertop application 1 (3) MIN.