Installation Instructions

Model BI-36U—Dual Installation 18
subzero.com/specs
REFRIGERATOR PANEL
(FRONT OF PANELS)
FREEZER PANEL
REFRIGERATOR PANEL
(FRONT OF PANELS)
FREEZER PANEL
9
1
/
4
"
(235)
50
1
/8"
(1273)
19"
(483)
72
1
/4" (1835)
1
/2"
(13)
5
/8"
(16)
GRILLE PANEL
36" (914) 36" (914)
1
/4" (6)
5
/32"
(4)
3
/32"
(2)
3
/32"
(2)
5
/32"
(4)
5
/32"
(4)
5
/32"
(4)
1
/8" (3)
1
/8" (3)
1
/8" (3)
1
/8" (3)
OVERLAY PANELS
REFRIGERATOR PANEL
(FRONT OF PANELS)
FREEZER PANEL
REFRIGERATOR PANEL
(FRONT OF PANELS)
FREEZER PANEL
9
1
/4"
(235)
50
1
/8"
(1273)
19"
(483)
73
1
/4" (1861)
1
/2"
(13)
5
/8"
(16)
GRILLE PANEL
36
1
/2" (927) 36
1
/2" (927)
1
/4" (6)
5
/32"
(4)
3
/32"
(2)
3
/32"
(2)
5
/32"
(4)
5
/32"
(4)
5
/32"
(4)
5
/8" (16)
1
/8" (3)
5
/8" (16)
1
/8" (3)
FLUSH INSET PANELS
Flush inset panel dimensions and mounting cleat offsets. Overlay panel dimensions and mounting cleat offsets.
Cleat Cut Length
PANEL HORIZONTAL VERTICAL
Grille (83" or 84" nished height) 71
1
/2" (1816) None
Grille
(88" nished height) 71
1
/2" (1816) 8" (203)
Refrigerator 35"
(889) 45
1
/2" (1156)
Freezer 35"
(889) 14" (356)
Model BI-36U—Dual Installation
DUAL WIDE GRILLE
The illustrations below provide panel dimensions and
mounting cleat offsets for overlay and ush inset panels.
Check dimensions of actual panels against the illustration
for your panel application.
IMPORTANT NOTE: Panels are viewed from the front to
show nished elevation. Cleats will be attached to the
back of the panels.
Grille panel dimensions shown are for standard 84"
(2134)
nominal nished height of unit. Grille panel will be 1"
(25)
shorter for 83" (2108) nished height and 4" (102) taller for
88"
(2235) nished height.
Cut mounting cleats to length according to the chart. Cut
lengths will be the same for overlay and ush inset panels.
Horizontal cleats for panel bottoms should be cut to include
as many holes as possible. Refer to page 4 for mounting
instructions. Dual installations require two mounting kits.
Mounting cleat offset detail.
OFFSET GAGE
CLEAT
PANEL
OFFSET
(OFFSET PROVIDED IN
PANEL ILLUSTRATION)