User Guide

ManualsBrandsSub-Zero ManualsOther700TR-PS

Removable

crisper cover

djustable glass

shelf and deli drawer

Adjustable spill-proof

lass shelves

lectronic digital

control panel

Adjustable dairy

ompartment

eamless

molding

Egg container

djustable door

shelves

Lower refrigerator

storage drawer

Upper refrigerator

storage drawer

Front venting with

removable kickplate

Magnetic door /

drawer gaskets

Location of serial

number

Stationary shelf

Planning Information

Integrated Model 700TR

All Refrigerator

Dimensions in parentheses are in

millimeters unless otherwise specified.

11/06

The Sub-Zero Model 700TR integrated

design accepts custom wood or stainless

steel door and drawer panels. Stainless

steel panels and handles are available as

sales accessories in three finishes—

classic, platinum and carbon.

Who sa

ys bigger is better? In this instance a 27"

(686) wide by 80" (2032) high refriger

ator is perfect.

At 15.5 cu ft (439 L) of storage, you have plenty of

space for most households and when coupled with a

Model 700TF or 700TFI you have a 54" (1372) wide

refrigerator/ freezer combination.

With this model, you can adjust the door cabinet

temperature independent of the two drawer environ-

ment. The r

ange for both compartments is 34˚F (1˚C)

to 45˚F (7˚C).

The door swing must be specified when ordering this

unit.

With the installation of a harness kit, these appliances are Star-K

compliant to meet strict religious regulations in conjunction with

specific instructions found on star-k.org. You may purchase this

harness kit through your Sub-Zero dealer. To obtain local dealer

information, visit the Locator section of our website, subzero.com.

odel 700TR

Summary of content (15 pages)

PAGE 1
Planning Information Integrated Model 700TR All Refrigerator Model 700TR Electronic digital control panel Seamless molding Adjustable spill-proof glass shelves Adjustable dairy compartment Adjustable glass shelf and deli drawer Adjustable door shelves Stationary shelf Egg container Location of serial number Removable crisper cover Magnetic door / drawer gaskets Upper refrigerator storage drawer Front venting with removable kickplate Lower refrigerator storage drawer With the installation of
PAGE 2
Planning Information Integrated Model 700TR F E AT U R E S Tall refrigerator unit with upper cabinet refrigerator and refrigerator storage drawers Refrigerator deli drawer for storage of smaller items Integrated design for "point-of-use" refrigeration A removable crisper cover with a clear-view window can be used in either storage drawer Dual refrigeration system with two distinct temperature zones ensures the freshest food and energy efficiency Electronic digital controls are up front and easy to us
PAGE 3
Planning Information Integrated Model 700TR S P E C I F I C AT I O N S MODEL Tall Refrigerator Unit 700TR Model 700TR Upper Cabinet Refrigerator with Refrigerator Drawers Overall Width 27" (686) Overall Height 80" (2032) Overall Depth 24" (610) Refrigerator Capacity 15.
PAGE 4
Planning Information Integrated Model 700TR I N S TA L L AT I O N S P E C I F I C AT I O N S TOP VIEW *PLACEMENT OF THE 1 1/2" ANTI-TIP BRACKET (38) SHOULD BE 24" (610) FROM THE FRONT OF THE UNIT WITHOUT PANELS TO THE BACK OF THE ANTI-TIP BRACKET.
PAGE 5
Planning Information Integrated Model 700TR I N S TA L L AT I O N N OT E S Refer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics. IMPORTANT NOTE: The depth of Model 700TR is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635). Refer to the installation illustration on page 4.
PAGE 6
Planning Information Integrated Model 700TR C A B I N E T RY A P P L I C AT I O N S Integrated refrigeration is compatible with virtually any style and look of cabinetry. The models can be used with framed as well as frameless cabinets. Because of the precise application and the look you may want to achieve, there are important questions you need to answer before ordering panels for the doors and/or drawers.
PAGE 7
Planning Information Integrated Model 700TR F R A M E D C A B I N E T RY A P P L I C AT I O N S Framed cabinetry applications present you with different questions to address. The illustrations on this page show common applications of framed cabinetry. These are not meant to be the only alternatives, but are suggestions from designers around the country. Also refer to the fullscale illustrations at the end of this section for specifics on door openings.
PAGE 8
Planning Information Integrated Model 700TR F R A M E D C A B I N E T RY – B E A D E D I N S E T A P P L I C AT I O N The illustration shows an Integrated 27" (686) wide tall unit installed within a framed cabinetry beaded inset application. 24" (610) SUB-ZERO UNIT CABINET DOOR TO WALL IMPORTANT NOTE: Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly.
PAGE 9
Planning Information Integrated Model 700TR F R A M E L E S S C A B I N E T RY A P P L I C AT I O N S The illustration below shows a hypothetical installation of an Integrated 27" (686) wide tall unit within frameless cabinetry. Review the illustration, giving particular attention to the overall panel specifications. Also refer to the fullscale illustrations at the end of this section for specifics on door openings. IMPORTANT NOTE: Dimensions are based on a 1/8" (3) reveal.
PAGE 10
Planning Information Integrated Model 700TR PA N E L C O N S I D E R AT I O N S The illustrations below provide panel width dimensions for installation of a 27" (686) wide tall unit and for installing two 27" (686) wide tall units side by side. When 3/4" (19) or thicker panels are used and a reveal less than 1/4" (6) is maintained, the door panels may cause damage to the Sub-Zero unit when the door is open at the maximum 105˚ door stop. You should use the built-in 90˚ door stop to prevent damage.
PAGE 11
Planning Information Integrated Model 700TR CABINETS 25 (635) I N S TA L L AT I O N O P T I O N S 27 (686) TOP VIEW Installation without side2panels. C The illustrations on this page show some typical installations and their dimension considerations. The depth dimension in the illustrations may vary depending on cabinet styles, treatment of countertops or other design options. IMPORTANT NOTE: The depth of each Integrated unit is 24" (610) from the front of the unit to its back.
PAGE 12
Planning Information Integrated Model 700TR D O O R PA N E L H E I G H T The height of the door panel can grow beyond 45 3/8" (1153) and exceed the 80" (2032) overall height, as long as you stay below the recommended door panel weight limit of 40 lbs (18 kg). The illustration below shows how the panel may grow and what you need to consider doing to finish the area in back of the door panel.
PAGE 13
Planning Information Integrated Model 700TR TOE KICK CLEARANCE The toe kick clearance can vary with the height of the lower drawer panel; the maximum panel height is 16 11/16" (424). IMPORTANT NOTE: You must keep a minimum space of 4" (102) clear below the bottom edge of the lower drawer panel so the unit can be properly vented. In addition, any decorative base molding must be removable for possible servicing and cleaning of the condenser.
PAGE 14
Planning Information Integrated Model 700TR SUB-ZERO DOOR FRAMED CABINETRY IMPORTANT NOTE: The depth of each Integrated unit is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. 24 T (610) TO BACK OF UNIT LINE OF INTERFERENCE* 105˚ maximum door opening – 1/4 scale (top view) LINE OF INTERFERENCE* AT MAXIMUM DOOR OPENING MOUNTING BRACKET SCREW 1 (3) MIN.
PAGE 15
Planning Information SUB-ZERO DOOR Integrated Model 700TR 3/4" (19) DOOR COUNTERTOP PANEL SIDE PANEL FRAMELESS CABINETRY IMPORTANT NOTE: The depth of each Integrated unit is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. 24 (610) TO WALL LINE OF INTERFERENCE* 105˚ maximum door opening – 1/4 scale (top view) Adjacent side panel and countertop application 1 (3) MIN.