installation instructions

2
Pry the cover away from the handle, and disengage it
fr
om the handle.
3
Use a T-20 T
orx bit to remove the handle mounting
screws.
4
Pull the handle from the drawer.
5
Use a T-15 T
orx bit to remove the bottom trim mounting
screws.
6
Pull the bottom trim from the drawer.
INSTALL THE DRAWER TRIM
1
Install the fr
eezer drawer bottom trim using the screws
from the previously removed trim.
2
Install both drawer side trim fillers so that they overlap
the side trim and hook up with the bottom trim.
3
Install the existing 500 or 600 Series drawer panel.
4
Install the drawer handle.
5
Install the screw cover
.
Built-In Series Framed Door Panel Retrofit Kit
subzero.com 800.222.7820
Page 2 of 2