installation instructions

These instructions are for side-by-side Built-In models:
▪ Kit 7005226 for BI-48S
▪ Kit 7005227 for BI-42S
▪ Kit 7005228 for BI-36S
CONTENTS
2 Hinge-side trim filler
1 Freezer door bottom trim filler
1 Refrigerator door bottom trim filler
1 Instruction sheet
REMOVE THE REFRIGERATOR DOOR HANDLE
1
Open the door.
2
At the top of the door, insert a flat-blade screwdriver
into the channel of the screw cover.
3
Push the screw cover away from the handle so that it
disengages from the handle.
4
Use a T-20 T
orx bit to remove the handle mounting
screws.
5
Pull the handle from the door.
INSTALL THE FRAMED DOOR PANEL RETROFIT
1
Install the hinge-side trim filler so that it overlaps the
hinge-side door trim.
2
Install the bottom trim filler so that it overlaps the
bottom door trim and hooks behind the hinge-side trim
filler
.
3
Install the existing 500 or 600 Series door panel.
4
Reattach the handle.
5
Reattach the scr
ew cover.
Note: Though only the freezer door is shown, the
procedure for the refrigerator door is the same.
Note: The freezer door hinge-side trim filler in the
7005228 package is
5
/
32
" wider than the refrigerator
door hinge-side trim filler. Be sure to install the wider
trim filler onto the freezer door.
Built-In Series Framed Door Panel Retrofit Kit
subzero.com 800.222.7820
7004561 REVE 10/2018
Page 1 of 1
*7004561$REVE*