User Guide

Planning Information
Wine Storage Model 424FS
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
MODEL 424FS – FREE-STANDING
The free-standing Model 424FS does not require any
panels or surrounding cabinetry. It has a beautiful classic
stainless steel exterior. For additional specifications and
installation information specific to Model 424FS, refer to
pages 2–3.
I
MPORTANT NOTE:
T
he anti-tip bracket must be installed
to prevent the unit from tipping forward.
WOOD FACING – WINE SHELVES
Sub-Zero has provided a natural cherry wood facing to
each of its wine shelves in each model. If, however, you
would like to replace these strips with wood more comple-
mentary to your design and surrounding cabinetry, you
can.
The Wine Shelf Wood Facing Dimensions illustration on
page 5, can be used as a full-scale template. You must
follow the layout of this format to accommodate the
shelves properly. To remove the cherry strips, take the
shelves out and merely remove the screws. Reverse the
procedure to affix the new wood.
If you choose to stain or seal the wood facing, be aware
that some of these substances are hazardous and will
damage stored wine.
A solid panel must not be
installed on a glass door unit, as
this may cause moisture to form
b
ehind the panel.