User Guide

Planning Information
Wine Storage Model 424
7
OVERLAY PANELS
The door frame of the unit has pre-drilled holes for our
optional handle hardware. Refer to Hardware Considera-
tions on page 8 for specifics about installing handle
hardware on this overlay application.
When planning to install the Model 424 next to adjoining
c
abinetry, you must make provisions to allow the door to
open to a maximum of 145˚ and not hit the door panel.
Refer to the full-scale illustration at the end of this section.
To give you a better idea of the exact space the Model 424
needs and how the panel fits in relationship with the unit,
refer to the chart and illustration below.
For additional specifications and installation information
specific to Model 424, refer to pages 2-5.
* INCH (13) ADJUSTMENT IN LEVELING LEGS
**
MODEL 424/S (STAINLESS STEEL WRAPPED DOOR) FINISHES OFF AT 23 INCHES DEEP
MODEL 424 CABINETRY DIMENSIONS
1
2
FRONT VIEW SIDE VIEW
(CABINET DIMENSION)
DOOR PANEL
(
603)
3
4
23
30
(764)
DOOR
PANEL
CENTERED
VERTICALLY
*34
1
2
(877)
(606)
7
8
**23
1
16
TOE
KICK
23
7
8
(606)
4
(102)
7
8
OVERLAY PANEL SPECIFICATIONS
Door P
anel (W x H)
23
3
/4" (603) x 30
1
/16" (764)
Width of Rails and Stiles 2
1
/4" (57) min
Door Panel Weight Limit 10 lbs (5 kg)
Panel Thickness
5
/8" (16) min
A solid panel must not be
installed on a glass door unit, as
this may cause moisture to form
behind the panel.
Dimensions in parentheses are in
millimeters unless otherwise specified.