installation instructions

Top Panel Installation

subzero.com 800.222.7820

page 1 of 1

3758503 REV-C 07/2015

CONTENTS

1 Panel, top

4 Screw

INSTALLATION

1 Rotate the grille upward. Remove the display cover by

extracting 3 screws from the display and one from the

vertical support, then disconnect the communication

cable from receptacle.

2 Remove three bolts from the bottom of the grille, then

remove the grille assembly.

Position top panel.

COVER

Remove cover.

Remove grille assembly

3 Position the top panel with the longer ange toward the

back of the unit.

4 Use the four screws provided to secure the panel to

the unit. Once the panel is secure, reinstall the grille

assembly, communication cable and display cover.

PAGE 1
Top Panel Installation subzero.com CONTENTS 1 Panel, top 4 Screw 3 Position the top panel with the longer flange toward the back of the unit. 4 Use the four screws provided to secure the panel to the unit. Once the panel is secure, reinstall the grille assembly, communication cable and display cover. INSTALLATION 1 Rotate the grille upward. Remove the display cover by extracting 3 screws from the display and one from the vertical support, then disconnect the communication cable from receptacle.