User Guide

23
Dimensions in parentheses are in
millimeters unless otherwise specified.
SIDE PANEL INSTALLATION
Side panels for Models 427 and 427R are not
a
ttached to the unit. You must securely fasten
the panels to adjacent cabinets and floor.
P
anels should be fastened to the floor and
walls using ‘L’ brackets (hardware not
provided). To help you move the unit into
p
lace, route out an area in the floor so the ‘L’
bracket will sit flush with the floor level.
Brackets and screws are provided for
mounting the unit to adjoining cabinets and
side panels. Each unit has four side-mounting
clips on each side.
IMPORTANT NOTE: For installations where
you are not attaching to a side wall, or you are
installing two Model 427, 427R or Integrated
units together, you must remove the side-
mounting clips before moving the unit into
position. After removing the clips, replace the
screws into the appliance.
Optional components are necessary for
anchoring two Model 427, 427R or Integrated
units together. Contact your Sub-Zero dealer or
call 800-222-7820 for details.
LOCK INSTALLATION
For Models 427 and 427R, the accessory lock is
a
ttached to the decorative door panel through
a field-drilled hole in the panel. The catch
should be installed on the top of appliance
cabinet before the unit was moved into
position. Installation instructions are included
with the lock kit.
IMPORTANT NOTE: For accessory stainless
steel panels requiring a lock, panels must be
ordered with the lock mounting hole pre-
drilled.
90-DEGREE DOOR STOP
Models 427 and 427R have a 90˚ door stop
built into the hinge system. Use the blade edge
of a standard screwdriver and rotate the brass
cam in the center portion of the hinge until
you reach the stop. You must make this adjust-
ment to both the bottom and top hinge. Refer
to illustration 15 below.
COMPLETING THE INSTALLATION
IMPORTANT NOTE: When you have
completed the installation of the Model 427
or 427R Wine Storage unit, refer to pages
3
4
–
35 for the Installation Checklist and Ser
vice
Information.
MODELS 427 AND 427R INSTALLATION
Illus. 15
MODELS
427 | 427R
OPTIONAL
COMPONENTS
Optional installa-
tion components
are available
through your
Sub-Zero dealer, or
call Sub-Zero at
800-222-7820.
You can also visit
our website at
subzero.com.