Quick Start Manual

4 | Wolf Customer Care 800.222.7820
SPECIFICATIONS
COMBINATION INSTALLATIONS
Wolf built-in ovens are designed and agency approved for
installation with Wolf cooktops, microwaves and warming
drawers only. The nominal width of the oven should match
the nominal width of the cooktop. A built-in oven cannot be
installed below a Wolf rangetop.
For typical combination installations, refer to the Wolf
Design Guide.
The single oven may be installed next to another E series
single oven. You must allow for a 1
1
/2" (38) space between
oven openings. A separate inner wall is required for each
oven between openings.
Installation Requirements
The oven can be installed in a standard or ush inset
application. Location of the electrical supply within the oven
opening may require additional cabinet depth. Refer to the
chart below.
Finish the edges of the opening. They may be visible when
the door is open.
For ush inset installations, a minimum
1
/4" (6) reveal is
required on all sides. To ensure consistent
1
/4" (6) reveals,
each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT
Single Oven 250 lb (115 kg)
Double Oven 400 lb (181 kg)
CABINET DEPTH
Standard Installation 24" (610) min
Flush Inset Installation 25" (635) min
Flush Inset (contemporary model) 25
1
/4" (641) min
TRIM (STANDARD INSTALLATION)
Top Overlap
5
/8" (16)
Bottom Overlap
1
/8" (3)
Side Overlap
3
/4" (19)