Quick Reference Guide

E Series Built-In Double Ovens
INSTALLATION NOTES
Wolf E series built-in ovens may be used in
a standard installation, where the face trim
overlaps stiles and rails, or in a flush inset
installation with the front of the oven flush
with surrounding cabinetry.
Complete installation specifications can be
found on our website, wolfappliance.com.
Unit dimensions may vary by ±
1
/8".
67" (1702)
T
YPICAL*
49
5
/8"
(1260)
OPENING
HEIGHT
E
E
E
28
1
/2" (724)
O
PENING WIDTH
E
5"
(127)
4"
(102)
24" (610) min
OPENING DEPTH
*D
imension must accommodate height of oven trim.
N
OTES: Location of electrical supply within opening may require additional cabinet depth.
D
ashed line represents profile of unit.
FRONT VIEWSIDE VIEW
SPECIFICATIONS
Overall Width 29
7
/8"
Overall Height 50
3
/8"
Overall Depth 23
3
/4"*
Oven Door Clearance 22"
Oven Interior Capacity
(per oven) 4.5 cu ft
Oven Interior Dimensions
(per oven) 25" W x 16
1
/2" H x 19" D
Minimum Cabinet Depth Standard 24"
Flush Inset 25"*
Minimum Base Support 400 lbs
Opening Width 28
1
/2"
Min Inset Width 30
3
/8"
Opening Height 49
5
/8"
Min Inset Height 50
15
/16"
Electrical Requirements 240/208 V AC
60 Hz, 50 amp circuit
Electrical Rating 8.9 kW at 240 V
6.7 kW at 208 V
Shipping Weight 466 lbs
*For black glass model, increase dimension by
1
/4".
INSTALLATION
SPECIFICATIONS
Standard Installation
OVERALL DIMENSIONS
IMPORTANT NOTE: Unless you
are using cabinets deeper
than 24" (610) for a standard
installation or 25" (635) for a
flush inset installation, it is
recommended that the elec-
trical supply be placed in an
adjacent cabinet within reach
of the conduit. Choose the
location shown in the illustra-
tions that best suits your
installation.
23
3
/4" (
603)
BEHIND FRAME
50
3
/8"
(1280)
49
1
/2"
(1257)
29
7
/8"
(759)
2
5
/8"*
(67)
1" (
25)
*
*
For black glass model, increase dimension by
1
/4" (6).
CONDUIT
CHANNEL
28
1
/4"
(718)
23
3
/4"
(603)
OPEN OVEN DOOR
22"
(559)
29
7
/8"
(759)
9
5
/8"
(
244)
8
7
/8"
(225)
3"
(76)
T
OP VIEWFRONT VIEW RIGHT SIDE VIEW
49
5
/8"
(1260)
OPENING
HEIGHT
50
15
/16"
(1294) min
FLUSH INSET
HEIGHT
28
1
/2" (724)
OPENING WIDTH
30
3
/8" (772) min
FLUSH INSET WIDTH
7
/8"(22) TOP CLEAT
7
/16" (11)
BOTTOM CLEAT
SIDE CLEATS
24
3
/4"*
(629) min
FLUSH INSET
DEPTH
1" (25)*
*For black glass model, increase dimension by
1
/4" (6).
NOTES: Minimum base support 400 lbs (181 kg).
Location of electrical supply within opening may require additional cabinet depth.
Cleats may be visible and should be finished to match cabinetry.
Dashed line represents profile of unit.
FRONT VIEWSIDE VIEW
T
OP VIEW
1" (25)
SIDE CLEATS
5"
(127)
4"
(102)
E
E
E
67" (1702)
TYPICAL
Flush Inset Installation
Dimensions in
parentheses are in
millimeters unless
otherwise specified.
©Wolf Appliance, Inc. all rights reserved. Features and specifications are subject to change at any time without notice. 6/12