Daim Ntawv Qhia Tus Neeg Siv
- 18 -
A10-TX-US User Guide
ª Loading an ALUG le onto the card from the Mic2Wav application will only save the user
group currently selected in the drop-down list.
4.
Eject the microSD card and insert it back into the transmitter.
5. Press the centre Menu button, then select Settings > User
Groups > User > Load New.
6. Select a user group.
ª With a user group loaded, the transmitter’s Frequency control changes between different
users in the group and their pre-assigned frequencies.
To dial in a specic user (and its frequency):
1.
Press the center Menu button on the transmitter.
2. Select Frequency.
3. Press the Left or Right button to select one of the user names.
The frequency will appear along with the name and user
number (1-32).
ª While in User mode, no non-user group frequencies will be selectable. To revert back
to manual frequency selection, set mode to Factory (Menu > Settings > User Groups >
Factory.)