Daim Ntawv Qhia Tus Neeg Siv
- 15 -
A10-TX-US User Guide
1
2
3
8
5
6
7
1
2
When the A10-TX-US transmitter is connected to a lavalier, with the A10-TX Remote app, you
can:
1 - Change the transmitter’s name; it is set to
the transmitter’s serial number by default
2 - Monitor Sleep status, Battery status,Blue-
tooth
®
signal strength and Mute status
3 - Turn Sleep mode On/Off
4 - Mute/Unmute the Trasnmitter
5 - Adjust Gain
6 - Set the low-cut lter
7 - Adjust RF Power
8 - Change TV Ch, Sub Ch and Frequency
ª When a user group is loaded, the
TV Ch...Frequency section changes to
User, displaying the current user name
between + / - Selection buttons, as shown
below:
Touch the unit name (left image) to access more information (image on right) about the
transmitter.
ª The Bluetooth operational range is very short. Maintain close proximity to the transmitter
for reliable connection.
User Groups
The User Groups feature allows for the easy, intuitive naming of specic frequencies for each
A10 transmitter used on set, and grouped together for faster tuning. The operator of an A10
receiver may then easily switch between transmitters by choosing alphanumeric names, such
as “Jack” and “Jill”, instead of having to remember and manually tune to different, specic
numerical frequencies.
For instance, a producer or director may want to monitor several different actors’ wireless
transmitters. Rather than having to keep a list of all of their frequencies, each transmitter may be
4