Daim Ntawv Qhia Tus Neeg Siv
- 14 -
A10-TX-US User Guide
Remote Control
The A10-TX-US can be remotely controlled from an Android or iOS device running the A10-TX
Remote app. The app is available as a free download from the Google Play store and iOS App
store, respectively.
The app appears differently depending on the audio source used with the transmitter. When the
A10-TX-US transmitter is connected to line or mic-level sources, with the A10-TX Remote app,
you can:
1 - Change the transmitter’s name; it is set
to the transmitter’s serial number by default.
When a user group is loaded, the selected
user name appears as here.
2 - Monitor Sleep status, Battery status,
Bluetooth signal strength, Record status and
Mute Status
ª Touch the Circle-I icon to send
identication signal to the transmitter.
3 - Turn Sleep mode On/Off
4 - Mute/Unmute the Transmitter
5 - Start/Stop recording at the transmitter
6 - Adjust Gain
7 - Set the low-cut lter
8 - Adjust RF Power
9 - Change TV Ch, Sub Ch and Frequency
ª When a user group is loaded, the
TV Ch...Frequency section changes to
User, displaying the current user name
between + / - Selection buttons.
1
2
3
9
6
7
5
8
1
2
The recording features are unavailable on the A10-TX Remote app when using lavaliers, as
shown in the following images.
4