Daim Ntawv Qhia Tus Neeg Siv

- 7 -
A10-TX-US User Guide
Menu Control and Menu Selections
The A10-TX-US transmitter is controlled through its menu. Enter the menu via the centre Menu
button. Once in the menu the Left and Right buttons toggle among options, and the Menu button
makes the selection.
The Menu Lock feature on the A10-TX-US provides a way to lock the buttons. Press
and hold the Power button while holding the Right button to lock/unlock access to menu
settings. When menu access is locked, a Lock icon (shown right) appears in the main
display.
When locked, the Power button remains active.
Main Menu
Selections Icon Description Options
Exit
Returns to the main display screen.
Frequency Selection
Sets the transmitter’s frequency. Frequency
selection and channel increments change based on
the region of operation the unit is set.
• TV Channel
• Sub Channel
• Tune Frequency increments in 25 kHz
steps
Audio Gain
Controls the gain range of the audio input. Gain
range is input type dependent. Gain control is in 1
dB increments.
• Lavalier: 0 dB to +40 dB
• Line setting: -10 to 16 dB
• Mic setting: 16 to 40 dB w/20dB pad
• Mic setting: 36 to 60 dB
Audio Setup
Enters the Audio Setup sub-menu. • Low Cut
• Limiter
• Lav / Mic / Line
• Mute Button
Record / TC
Enters the Record / TC sub-menu. • Record / Stop
• File Info
• TX / Record Mode
• Timecode
• Frame Rate
ª Timecode and Frame Rate are the only options available for Lavalier operations.
Privacy
Activates transmission privacy with a four-number
key set on the transmitter and receiver. When
active, the receiver must be set to the corresponding
key for audio to pass.
New Key option generates a key. The key symbol
is displayed on main default screen when privacy
is active.
• New Key - generates new key
• Off - encryption cleared, set to ----, not
active
Settings
Enters the Setting sub-menu. • Bluetooth
• RF Power
• Modulation
• Battery Type
• User Groups
• TV Ch Map
• Display
System
Enters the System sub-menu. • Sleep
• Lock Menu
• Set Time/Date
• Format Card
• Restore
• Info
• Update Firmware