Daim Ntawv Qhia Tus Neeg Siv

- 16 -
A10-TX-US User Guide
SD-Utility supports the creation of up to eight user groups, each with a max of 32 users, per
Audio Limited User Group (ALUG) le.
To add additional user groups:
1. In SD-Utility, select Add Group.
2. Name the new group and select the band of frequencies for the group.
3. Add users (dening name and frequencies) to the group.
Audio Limited User Group les (ALUG) may be saved for future use and modication. When
saving the ALUG le, SD-Utility will default the le name to the rst User Group name in the
drop-down list.
To load an ALUG le into SD-Utility:
1. In SD-Utility, select User Group File > Open.
2. Choose an ALUG le on your computer.
To remove a user group:
1. In SD-Utility, select a User Group in the drop-down list.
2. Select Remove Group.
Loading User Groups onto A10 Transmitters
A user group is transferred to the A10-TX-US via the microSD card inserted into the transmitter.
ª For instructions on sending a user group to A10 receivers, see the A10-RX User Guide.
To load a user group on an A10-TX-US:
1. If the microSD card has not been formatted by the transmitter already, do so by inserting it
into the transmitter and select System > Format Card > OK.
2. Remove the microSD card from the transmitter and insert it into your computer.
3. Drag and drop the entire ALUG le to the microSD card.
ª Saving an ALUG le from the SD-Utility application only saves the user group selected from
the drop-down list.
4.
Eject the microSD card and insert it back into the transmitter.
5. Press the centre Menu button, then select Settings > User
Groups > User > Load New.