Daim Ntawv Qhia Tus Neeg Siv
- 14 -
A10-TX-US User Guide
Remote Control
The A10-TX-US can be remotely controlled from an Android or iOS device running the A10-
TX-US Remote app. The app is available as a free download from the Google Play store and iOS
App store, respectively.
With the A10-TX-US Remote app, you can:
1 - Change the transmitter’s name; the serial
number is used at default. When using User
Groups, the user name is displayed.
2 - View timecode and frame rate
3 - Monitor Sleep status, Battery status,
Bluetooth signal strength, Record status,
Mute Status
ª Touch the Circle-I icon to send
identication signal to the transmitter.
4 - Turn Sleep mode On/Off
5 - Mute/Unmute the transmitter
6 - Start/Stop recording at the transmitter
7 - Adjust Gain
8 - Set the low-cut lter
9 - Adjust RF Power
10 - Change TV Ch, Sub Ch and Frequency
ª When a user group is loaded, the TV Ch/
Sub Ch/Frequency section changes to
User, displaying the user names between
+ / - Selection buttons as shown below:
1
3
4
10
7
8
6
9
1
2
3
Touch the name (left image) to access more information (right image) about the transmitter.
ª The Bluetooth operational range is very short. Maintain close proximity to the transmitter
for reliable connection.
4